Xerox CopyCentre C118 System Administration Manual page 116

13 Problem Solving
When a switch off/on message is displayed
A fault occurred in the
NetWare interface.
When the required printing result is not obtained
The specified print language
of the print job is different
from one specified in the
machine.
Banner page print is specified
for the job.
The file server and network
are in the overload state.
A fault occurred during print
processing.
116
Cause Confirmation Method
Cause Confirmation Method
Check the print language of
the machine.
<Confirmation -1>
When printing under the
CAPTURE/NPRINT print job
configuration, use the SHOW
option to check that the
banner flag is not specified.
<Confirmation -2>
When printing from
PCONSOLE under the print
job configuration created with
PRINTCON, check that the
banner page print is
available.
Check the NetWare error
displayed on the control
panel.
Xerox CopyCentre/WorkCentre 118 System Administration Guide
Switch the machine off and
–
on.
Specify the same print
language of the print job as
that of the machine.
<Action -1>
When defining the
CAPTURE/ NPRINT print job
configuration, specify
NOBANNER.
<Action -2>
Inactivate the banner page
print in the print job
configuration with
PRINTCON.
<PServer mode>
No action.
– <RPrinter mode>
Extend the duration before
timeout.
Switch the machine off and
on.
Action
Action