Xerox CopyCentre C118 System Administration Manual page 58

4 UNIX TCP/IP
NOTE: For some print languages, the color parameter may be invalid.
NOTE: The system default is used if no parameter is specified.
Specifying stapling
The following parameters can be specified for stapling.
STAPLETL
STAPLETD
STAPLETR
STAPLELD
STAPLERD
STAPLEBL
STAPLEBD
STAPLEBR
NOTE: The stapling setting is not available on the machine.
NOTE: If several parameters are specified in the first lpr command, data may not print.
NOTE: For some print languages, the stapling parameter may be invalid.
Printing
To specify the output format of printing, enter the following command:
Enter a "," (comma) after -C followed by the parameters which specify the output
format. To specify multiple parameters, separate them with ",".
For example, to print a file named "file1", two-sided on A4 (210 × 297mm/8.3 ×
11.7inches) on printer fxPS, enter the following command:
NOTE: If the parameter string of the -C option exceeds 64 characters, the operation
may not function correctly.
58
Parameter
-C,[parameter],[parameter]
%lpr -PfxPS -C,DUP,A4 file1
Xerox CopyCentre/WorkCentre 118 System Administration Guide
Description
Places one staple in the upper left corner of the prints.
Places two staples at the top of the prints.
Places one staple in the upper right corner of the prints.
Places two staples on the left side of the prints.
Places two staples on the right side of the prints.
Places one staple in the lower left corner of the prints.
Places two staples at the bottom of the prints.
Places one staple in the lower right corner of the prints.