E-Mail - Xerox CopyCentre C118 System Administration Manual
Xerox copycentre c118: user guide
Hide thumbs
Also See for CopyCentre C118:
- User manual (230 pages) ,
- Quick reference manual (116 pages) ,
- Network manual (62 pages)
Table of Contents
Advertisement
4.
Set up the following option to be displayed in the frame.
• Port Number
NOTE: For more information about the options, refer to Properties in the CentreWare
Internet Services chapter of the User Guide.
5.
Select [Apply New Settings] to reflect the new setting.
6.
Enter the user ID and password, then select [OK].
NOTE: The default user ID is "admin" and the default password is "x-admin".
7.
When the reboot message appears, select [Reboot].
This page allows you to configure the E-mail settings for the following options.
NOTE: Some settings on this page will only be available after you reboot the machine
from CentreWare Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol
Settings] folder.
3.
Select [E-mail].
4.
Set up the following options to be displayed in the frame.
• POP3 Server Address (Specify when the machine sends the E-mail using the POP
before SMTP feature.)
• Max. no. of pages for Split Send
• POP User Name (Specify when the machine sends the E-mail using the POP before
SMTP feature.)
• POP User Password (Specify when the machine sends the E-mail using the POP
before SMTP feature.)
• Re-enter Password
• SMTP Send Authentication – POP before SMTP
• SMTP Server Address or Host Name. If Host Name is used, ensure that the DNS
setting is correct. The DNS setting can be accessed from [Properties] > [Protocol
Settings] > [TCP/IP].
NOTE: For more information about the options, refer to Properties in the CentreWare
Internet Services chapter of the User Guide.
5.
Select [Apply New Settings] to reflect the new setting.
6.
Enter the user ID and password, then select [OK].
NOTE: The default user ID is "admin" and the default password is "x-admin".
Xerox CopyCentre/WorkCentre 118 System Administration Guide
Using CentreWare Internet Services to Configure Settings on the Machine
103
Advertisement
Table of Contents
