Advertisement
Step 5(a): No solar
Main CT installation
Open the clasps on the CTs and place each clamp around one of the main service
cables. Then, shut the clasps to secure the CTs. IMPORTANT! The Breaker W
imprint on the bottom of the CTs should point toward the breakers. Finally,
insert the screw terminal plugs into the ports on the right side of the monitor. To
avoid clutter, unscrew the 22 AWG wires from the screw terminals, cut them to
size, and reattach them ensuring the black and white wires match the icons on the
front of the Inhab Energy.
Meter
Hazardous Voltage
Will cause death or serious injury.
Turn off and lock out all power supplying this device before working on
this device. Replace all covers before power supplying this device is
turned on.
Breakers
DANGER
INHAB™ ENERGY INSTALLATION GUIDE
15
Advertisement
