Table of Contents
Advertisement
Moto Z Play (Droid) / Moto Z Play
Level 2 – Service and Repair Manual
Front-Facing Imager Assembly
Description
ASSY,PWA,XCVR,VERTEX 3/32 – R
ASSY,PWA,XCVR,VERTEX 3/32 – CN
ASSY,PWA,XCVR,VERTEX 2/16 – VZW
ASSY,CAMR,5MP,FRONT IMGR
DIE CUT,KAPTON, UNIVERSAL, 7 X 3
1.
Remove the protective liner from the Front-
Facing Imager, if present.
2.
Place the PCB on a flat, steady surface.
3.
Verify the Front-Facing Imager ZIF Connector
Door is open.
4.
Insert the Front-Facing Imager Flex into the
Front-Facing Imager Flex ZIF Connector.
5.
Verify the Front-Facing Imager Flex is on top of
the spring contact.
6.
Slide a fingertip across the ZIF Connector Door
to close it.
7.
Place Kapton tape over the Front-Facing Imager
ZIF Connector Door.
PAGE 81
Reference #
2
19
34
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
