Table of Contents
Advertisement
Moto Z Play (Droid) / Moto Z Play
Level 2 – Service and Repair Manual
Rear-Facing Imager Removal
NOTE
The Rear-Facing Imager can be
recovered and reused after removal.
1.
Use the Tweezers to remove the Kapton
Tape from the Rear-Facing Imager Flex ZIF
Connector Door.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
2.
Place the PCB on a flat, steady surface, as
shown.
3.
Use the flat end of the Blackstick to open the
Rear-Facing Imager Flex ZIF Connector Door.
4.
Remove the Rear-Facing Imager from the ZIF
Connector.
PAGE 54
®
Do not share without consent from Motorola
Motorola Mobility Confidential Restricted:
Advertisement
Table of Contents
