Lenovo motorola Moto Z Play (Droid) Service And Repair Manual page 92

Moto Z Play (Droid) / Moto Z Play
Level 2 – Service and Repair Manual
8. Press down on the bottom of the PCB, to the left
of the USB Port, until the PCB snaps into place.
9. Remove the adhesive liner from the
Magnetometer Flex.
10. Place the Magnetometer Flex in the pocket of the
Housing wall.
11. Use the flat end of the Blackstick to press on the
Magnetometer Flex for 5 seconds to secure it to
the Housing.
12. Remove the adhesive liner from the Battery
Temperature Sensor Flex.
13. Place the Battery Temperature Sensor Flex on
the Housing floor, aligning it to the etched
recess.
14. Press on the Battery Temperature Sensor Flex
for 5 seconds to secure it to the Housing.
PAGE 92
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola