Table of Contents
Advertisement
Moto Z Play (Droid) / Moto Z Play
Level 2 – Service and Repair Manual
10. Verify the Display Flex ZIF Connector Door is
open.
11. Insert the Display Flex into the Display Flex ZIF
Connector. Use the white line as a guide for
insertion depth.
12. Slide a fingertip across the ZIF Connector Door
to close it.
13. Verify the FPS Flex ZIF Connector Door is open.
14. Insert the FPS Flex into the FPS Flex ZIF
Connector.
15. Slide a fingertip across the ZIF Connector Door
to close it.
16. Lower the Display into the Housing.
17. Press down on the Display for 10 seconds to
secure the Display to the Housing.
18. Place the Addison Main Lens Alignment and
Press Head and Fixture (3-00-K5-10000) into the
Press (19501980).
19. Place the phone into the Fixture with the Display
side down.
20. Press the phone for 15 seconds to secure the
Display to the Housing.
PAGE 118
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
