Table of Contents
Advertisement
Lenovo Moto X (4
th
Generation)
Level 2 – Service and Repair Manual
Front-Facing Imager Assembly
Description
ASSY,PWA,SLG,MAIN,PAYTON LATAM,QJX
IBIS FRU MB LATAM 3+32G CS
IBIS FRU MB NA 3+32G CS
IBIS FRU MB EMEA 3+32G CS
IBIS FRU MB EMEA 4+64G CS
IBIS FRU MB APAC 4+64G CS
IMGR MDL,CMOS,16MP,8MMX8MMX4.73MM,MIPI,5P,1/3,LAND,2.8V
IMGR MDL,CMOS,16MP,8MMX8MMX4.73MM,MIPI,
TAPE,FRNT CAMR CNDT FABR
1.
Use your fingers to position the Front-Facing
Imager Flex so the BtB Connector on the Flex
is lined up with the connection on the PCB.
2.
Use Rolling pressure to engage the BtB
Connector with the connection on the PCB.
3.
Use the Tweezers to peel the Conductive
Tape from the carrier.
4.
Use the Tweezers to apply the Conductive
Tape onto the PCB and the Front-Facing
Imager as shown.
5.
Use a fingertip to secure the Conductive Tape
to the PCB and the Front-Facing Imager.
PAGE 84
12/20/2017
Reference #
3
26
28
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
Advertisement
Table of Contents
