Lenovo motorola Moto Z Play (Droid) Service And Repair Manual page 114

Moto Z Play (Droid) / Moto Z Play
Level 2 – Service and Repair Manual
14. Lightly press down on the length of the Display
Flex to secure it to the Display Pad.
15. Remove the Display Flex from the pins, and lift
the Alignment Lid away from the Fixture.
16. Remove the adhesive liner from the black
Display Flex Kapton Tape.
17. Place the black Display Flex Kapton Tape on the
Display Flex as shown. Use the bottom of the
Display Flex and the alignment hole as alignment
guides.
// CAUTION //
Do not apply excessive pressure to this area of
the Display Flex.
18. Remove 2 #1 Conductive Pads from the carrier
and place them on the Display Flex at the
locations shown.
19. Remove 3 #2 Conductive Pads from the carrier
and place them on the Display Flex at the
locations shown.
PAGE 114
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola