Moto Z Play (Droid) / Moto Z Play
Level 2 – Service and Repair Manual
6.
Wrap the Battery Pull Tab around the top edge of
the Battery.
7.
Press down on the Battery Pull Tab for 5
seconds to secure it to the Battery.
8.
Remove the remaining alignment liner from the
Battery Pull Tab.
9.
Remove the Short Stiffener Strip from the carrier.
10. Carefully lift the Battery Flex up 90 degrees.
11. Place the Short Stiffener Strip on the bottom
edge of the Battery under the Battery Flex.
12. Press on the Short Stiffener Strip for 5 seconds
to secure it to the Battery.
13. Carefully rotate the Battery Flex back to its
original position.
14. Remove the Long Stiffener Strip from the carrier.
15. Place the Long Stiffener Strip on the edge of the
Battery closest to the Battery Flex.
16. Press on the Long Stiffener Strip for 5 seconds
to secure it to the Battery.
17. Remove the liner from the Battery Adhesive.
PAGE 99
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola