Table of Contents
Advertisement
Moto Z Play (Droid) / Moto Z Play
Level 2 – Service and Repair Manual
Front-Facing Imager Removal
NOTE
The Front-Facing Imager can be
recovered and reused after removal.
1.
Use the Tweezers to remove the Kapton Tape
from the Front-Facing Imager Flex ZIF
Connector Door.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
2.
Place the PCB on a flat, steady surface, as
shown.
3.
Use the flat end of the Blackstick to open the
Front-Facing Imager Flex ZIF Connector
Door.
4.
Lift the Front-Facing Imager away from the
ZIF Connector.
PAGE 55
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
