Table of Contents
Advertisement
Moto Z Play (Droid) / Moto Z Play
Level 2 – Service and Repair Manual
20. Remove the adhesive liner from the yellow
Display Flex Kapton Tape.
21. Place the yellow Display Flex Kapton Tape on
the Display Flex as shown. Use the bottom of the
Display Flex and the alignment hole as alignment
guides.
22. Lightly press down on the yellow Display Flex
Kapton Tape to secure it to the Display and Flex.
23. Place the Fixture and Display into the Press
(19501980).
24. Place the Addison Display Assembly and Press
Head (3-00-K7-10000) into the Press.
25. Press the Display for 5 seconds to secure the
Flash Flex to the Display.
PAGE 115
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
