Rear-Facing Imager Removal - Lenovo Moto X 4th Generation Service Manual

Lenovo Moto X (4 th Generation)
Level 2 – Service and Repair Manual

Rear-Facing Imager Removal

NOTE
The Rear-Facing Imager can be
recovered and reused after removal.
1. Use the Torque Driver and T5 Torx Bit to
remove the 2 Torx Machine Screws holding
the Rear-Facing Imager to the Rear Housing.
NOTE
After you remove the Torx Machine
Screws, you cannot reuse them.
2. Use your fingers to lift the Rear-Facing Imager
from the pocket in the Rear Housing.
PAGE 43
12/20/2017
Lenovo Confidential Restricted:
Do not share without consent from Lenovo