Emc Considerations; Fcc Compliance Statement; Industry Canada Statement - Honeywell Vertex M User Manual

1.2 EMC Considerations

Honeywell's monitor has been designed to comply with applicable Electromagnetic
Compatibility (EMC) standards at the time of manufacture. The design includes filtering,
shielding, and bypassing techniques. At the time of certification, simulated customer
Input/Output (I/O) schemes were tested. All methods used in the equipment for emission
suppression and reduction of susceptibility are interactive. Modifications to the instrument
could result in increased emissions and higher vulnerability to other radiated fields. Following
the guidelines in this EMC Considerations section will ensure the instrument maintains the
highest degree of EMC integrity. The guidelines listed apply only to I/O emissions and do not
apply to A.C. and D.C. instrument power connections.

1.3 FCC Compliance Statement

Changes or modifications not expressly approved could void the authority to use this
equipment.
This device complies with Part 15 of the FCC Rules. Operation to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

1.4 Industry Canada Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Vertex M
CAUTION
11 User Manual