Table of Contents
Advertisement
In-Call User Alert
Allows the radio to remain muted to affiliated talkgroup calls while operating on the current Trunking
Personality or conventional channel.
Internet Protocol Address
Displays the Internet Protocol (IP) address, device name, and status of the radio.
Location
Displays the current location (latitude, longitude, time, and date), and also the distance and bearing to
another location, or toggles GPS/Location between on and off.
Fall Alert Clear
Allows you to clear the Fall Alert mode alarm and exit Fall Alert feature.
Message
Allows you to access the message list.
Mode Select (MS01– MS13)
Long press – Saves the current zone and channel to one of the Mode Select menus when the
Preconfigurable Preset Zone and Channel field is enabled.
Short press – Changes to the preset Mode Select zone and channel.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until the function is disabled.
Multiple Private Line (Conventional Only)
Allows you to access the Multiple Private Line lists.
Nuisance Delete
Temporarily removes an unwanted channel, except for priority channels and the designated transmit
channel from the scan list.
Phone Call
Allows you to make and receive calls similar to standard phone calls.
Private Call (Trunking Only)
Allows a call from one individual radio to another.
Private Line Defeat (Conventional Only)
Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel.
Priority Dispatch
Allows you to call the dispatcher on a different talkgroup.
Radio Profiles
Allows you to access a set of preprogrammed visual and audio settings of the radio.
Recent Calls
Allows you to view the recent call history of your radio.
Rekey Request
Notifies the dispatcher that a new encryption key is needed.
Remote Monitor
Enables the system administrator to remotely command a targeted radio.
Remote Emergency
Activates the Remote Emergency feature for an authorized user to initiate the Emergency feature on a
target radio without target user intervention.
Repeater Access Button (RAB) (Conventional Only)
Allows you to manually send a repeater access codeword.
Reprogram Request (Trunking Only)
Notifies the dispatcher that a new dynamic regrouping assignment is needed.
MN004476A01-AN
Chapter 3: Radio Controls
23
Advertisement
Table of Contents
