Table of Contents
Advertisement
When you receive a Private Call, you hear two alert tones and the LED blinks green. The display shows Call
received and the call received icon blinks.
Procedure:
1. Perform one of the following actions:
●
Press the Menu Select button directly below Resp.
●
Press the Call Response button within 20 seconds after the call indicators begin.
If the caller alias is in the call list, the display shows the caller alias during the call.
If the caller name is not in the call list, the display shows the caller ID.
2. Press and hold the PTT button to talk. Release the PTT button to listen.
3. Press
or the Call Response button to hang up and return to the Home screen.
Result:
5.4.3
Receiving and Responding to a Telephone Call
(Trunking Only)
This feature allows you to receive calls similar to standard phone calls from a landline phone.
When and where to use:
When you receive a Telephone Call, you hear a telephone-type ringing and the LED blinks green. The
backlight of the screen and the bar turns green.The display shows Phone call and the call received icon
blinks.
Procedure:
1. Press the Call Response button within 20 seconds after the call indicators begin.
2. Press and hold the PTT button to talk. Release the PTT button to listen.
3. Press
or the Call Response button to hang up and return to the Home screen.
5.5
Methods to Make a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by using:
●
The preprogrammed Zone switch.
●
The 16-Position Select Channel Knob.
●
A preprogrammed button.
●
The Contacts list (see
5.5.1
Making a Talkgroup Call
Procedure:
1. Turn the 16-Position Select Channel Knob to select the channel with the desired talkgroup.
2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
Viewing Details of a Contact on page
Chapter 5: General Radio Operation
58).
MN004476A01-AN
41
Advertisement
Table of Contents
