Table of Contents
Advertisement
MN004476A01-AN
Chapter 7: Advanced Features
7.5.4
Changing the Scan List Status
Procedure:
1. Perform one of the following actions:
●
Long press the preprogrammed Scan List Programming button (side button).
●
Move the preprogrammed Scan List Programming switch to programming position.
The display shows the programming mode icon and the first list member.
2.
or
to the member you want to edit.
3. Perform one of the following actions:
●
Press the Select button once to add the currently displayed channel to the scan list.
●
Press the Select button one or more times to change the scan list status icon of the currently
displayed channel.
4. Perform one of the following actions:
●
or
to select more list members whose scan status you want to change.
●
Use the 16-Position Select knob to select another scan list member.
5. Move the Scan List Programming switch out of programming position. Press
programming and return to the Home screen.
7.5.5
Viewing and Changing the Priority Status
Procedure:
Perform one of the following actions:
●
Press the Menu Select button directly below Sel one or more times to change the priority status of
the current displayed channel.
●
Press the Select button one or more times to toggle between different status of the Scan List status
icon of the current displayed channel.
The radio shows one of following priority status icons and scenarios:
●
A Scan icon indicates that the current channel is in the scan list as a non-priority channel. The LED
lights up solid green.
●
A Priority-One Channel Scan icon indicates that the current channel is in the scan list as the
Priority-One channel. The LED rapidly blinks green. You hear all traffic on the Priority-One channel,
regardless of traffic on non-priority channels.
●
A Priority-Two Channel Scan icon indicates that the current channel is in the scan list as the
Priority-Two channel. The LED blinks green.
●
No icon indicates that the current channel is deleted from the scan list.
7.6
Scan
This feature allows you to monitor traffic on different channels by scanning a programmed list of channels.
Scanning is halted if you initiate a call and resumes when the call has ended.
60
to exit scan list
Advertisement
Table of Contents
