Dynamic Regrouping (Trunking Only); Classification Of Regrouped Radios; Requesting A Reprogram (Trunking Only) - Motorola APX 8000H User Manual

Hide thumbs Also See for APX 8000H:
Table of Contents

Advertisement

MN004476A01-AN
Chapter 7: Advanced Features
Procedure:
1. Press the preprogrammed Priority Dispatch button.
A tone sounds and the radio enters Priority Dispatch mode. The radio exits this mode when the
Priority Dispatch Time Out Timer expires.
2. Before the Priority Dispatch Time Out Timer expires, press and hold the PTT button to transmit.
The display shows the Priority Talkgroup alias.
3. Release the PTT button to listen.
The radio exits Priority Dispatch mode, returns to its original talkgroup, and displays the home channel
alias.
7.2.5

Dynamic Regrouping (Trunking Only)

This feature allows the dispatcher to temporarily reassign selected radios to a particular channel to
communicate with each other.
When your radio is dynamically regrouped, it receives a dynamic regrouping command and automatically
switches to the dynamically regrouped channel. You hear a tone and the display shows the name of the
dynamically regrouped channel.
When the dispatcher cancels dynamic regrouping, the radio automatically returns to the previous zone and
channel.
If you access a zone or channel that has been reserved as a dynamically regrouped mode for other users,
you hear an invalid tone.
7.2.5.1

Classification of Regrouped Radios

The dispatcher can classify regrouped radios into Select Enabled or Select Disabled categories.
Select Enabled
Select-enabled radios are free to change to any available channel, including the dynamic-regrouping
channel, once you have selected the dynamic-regrouping position.
Select Disabled
Select-disabled radios cannot change channels while dynamically regrouped. The radio is forced to
remain on the dynamic-regrouping channel.
The Scan and Private Call features are unavailable when your radio is Select Disabled.
7.2.5.2

Requesting a Reprogram (Trunking Only)

This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Procedure:
Perform one of the following actions:
Press the preprogrammed Reprogram Request button to send a reprogram request to the
dispatcher.
52

Advertisement

Table of Contents
loading

Table of Contents