Table of Contents
Advertisement
5. Press
or
to select the required channel and press SEL to access the channel parameter.
The radio displays the channel parameter screen.
6. Press
or
to select the required channel parameter.
7.28.19.4
Changing a Channel Parameter
Procedure:
1. Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2. Enter the password and press the Menu Select button directly below Ok.
3.
or
to scroll through the various information.
4. Press EDIT to edit the channel parameter.
5. Change the parameter value.
6. Press OK to accept the parameter change and return to view mode.
7. Perform one of the following actions and proceed to the next step:
●
or
to select other channel parameters.
●
Press BACK to access a different channel and make any necessary programming changes.
8. Press BACK to return to Zone List Selector.
9. Press BACK to return to FPP main menu.
10. Press
to return to the Home screen.
7.28.19.5
Editing Parameters
When and where to use: For all parameters except Chan Name, Zone Name, Top Chan Name and Top
Zone Name the or buttons increment or decrement the selected value by scrolling through the valid
entries.
Procedure:
Perform the following actions based on the type of the parameter:
Table 7: Parameter Editing Keys
Parameter
Editing Keys
Tx
Perform one of the following:
Rx
●
Tx PL
Perform one of the following:
Rx PL
●
Tx DPL
DEL to delete the parameter value of PL entered.
Rx DPL
In addition, for Tx DPL and Rx DPL, the INVT softkey switches INVERT on and off.
or to increment entry and to move cursor.
or to increment entry and to move cursor.
MN004476A01-AN
Chapter 7: Advanced Features
Value
129
Advertisement
Table of Contents
