Table of Contents
Advertisement
MN004476A01-AN
Chapter 7: Advanced Features
You shall receive a service advertisement message to indicate the Query is available after you have
successfully logged in the radio with a Two-Factor Authentication.
NOTE: The query server must be selected as the destination so that it can receive the query message
and respond the query with text message. The query server must be an entry in the data user list in the
CPS.
Procedure:
1. Perform one of the following actions:
●
To access this feature using the preprogrammed button, press the preprogrammed TMS Query
button and proceed to
●
To access this feature using the menu, proceed to the next step.
2.
or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen.
3. Perform one of the following actions:
●
or
to Compose and press the Menu Select button directly below Sel.
●
Press the Menu Select button directly below Exit to return to the Home screen.
4.
or
to Query and press the Menu Select button directly below Sel for a predefined message.
5.
or
to scroll through the list of messages and press the Menu Select button directly below Sel to
select the required message.
The message appears on the Compose screen, with a blinking cursor at the end of it.
6. Use the keypad to edit the message, if required.
7. Press the Menu Select button directly below Optn.
8.
or
to Send Message and press the Menu Select button directly below Sel.
9. Perform one of the following actions:
●
or
to scroll through the address list and highlight the required address.
●
or
to [Other Recpnt] and press the Menu Select button below Edit. A blinking cursor
appears on the Enter Address screen. Use the keypad to type the address entry.
10. Press the Menu Select button below Send or the PTT button to send the message.
The display shows the Send Message screen and Sending msg.
If the message is sent, you hear a tone and the display shows Msg sent.
If the message is not sent, you hear a low tone, the display shows Send failed and returns to the
main TMS screen.
NOTE: The server responds to your query with the required report in text messages.
You can append a priority status and/or a request reply to your message. See
Request Reply for New Text Messages on page 81
7.17.3
Receiving a Query
When and where to use:
The information requested is received in TMS format.
88
step
5.
for more information.
Priority Status and
Advertisement
Table of Contents
