Table of Contents
Advertisement
The display returns to Available Dev screen.
7.23.3
Viewing and Clearing the Bluetooth Device Information
Procedure:
1.
or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen.
2.
or
to Devices.
Once the display highlights the Devices, the display shows XX connected alternates with XX
paired.
3. Press the Menu Select button directly below Sel.
4. If there are devices being paired or connected,
to see the status of each device.
If there are no active Bluetooth devices being paired or connected, the display shows No devices.
5. Perform one of the following actions:
●
To clear the device from the list,
directly below Clr.
●
To exit from this function, press the Menu Select button directly below Back to return to the
previous screen without deleting the device name.
If Clr is selected, the display shows <Device Friendly Name> clear?.
6. Press the Menu Select button directly below Yes or No to proceed delete the device or to exit this
function and return to previous screen.
Result: If the device is deleted successfully, the display shows <Device Friendly Name> cleared to
indicate clearing is successful.
If the device is not deleted successfully, you hear the radio sounds a short, low-pitched tone. The display
shows <Device Friendly Name> clear failed. The display returns to previous screen.
Postrequisites:
NOTE: If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on all
previously paired devices as well. (Please see your Accessories manual for further details.)
7.23.4
Pairing with LEX Handheld
Prerequisites: Ensure that Bluetooth feature of your radio is on and the Bluetooth tones are enabled.
Procedure:
1. Turn on the handheld and activate the Bluetooth feature.
2. Place the handheld close to the radio aligning the Bluetooth Pairing Location on the handheld with the
Bluetooth Pairing Location on the radio.
If the pairing process is successful, you hear an incremental-pitched tone from the radio. The radio
begins to connect to the handheld. If the connecting process is successful, you hear an incremental-
or
along the list of <Device Friendly Name>
or
to the required device, press the Menu Select button
MN004476A01-AN
Chapter 7: Advanced Features
107
Advertisement
Table of Contents
