Table of Contents
Advertisement
MN004476A01-AN
Chapter 7: Advanced Features
The radio searches the current zone for the channel with same talkgroup assigned as the Dynamic Talkgroup
and also with same system ID of current trunk system. Once matched, the radio display shows the first
matched and connected channel alias.
If there is no channel with matching Talkgroup ID and trunk system ID, the radio display shows the channel
alias of <DYNAMIC talkgroup>.
Once the radio is connected, you hear a dynamic regroup tone, the radio display shows <DYNAMIC
channel> with the temporary green color intelligent backlight and you hear a Voice Announcement.
NOTE:
When the radio loses the GPS signal, the GPS icon blinks and the radio sounds two high-pitched tones
repetitively to indicate that the GPS has failed to operate. The radio display shows the red intelligent
light.
If the first matched channel is not configured with Voice Announcement, no Voice Announcement is
played.
The system sends a message to your radio. The radio display shows a direct text message content without
any user operation. This message indicates that you are currently present in a Geofence area. This TMS
remains open on the display until user presses exit/home to exit this screen.
NOTE: If there is another incoming text message before you exit the previous message, the message
screen is refreshed to show the latest message.
The following procedure guides you to exit the text message received.
Procedure:
Press the Menu Select button below Exit or
Result:
The other operations are the same as normal dynamic regroup command.
When the radio exits the Geofence area, your radio reverts to original channel or newly assigned talkgroup.
The radio display shows the new channel together with Voice Announcement to indicate the changes. Voice
Announcement of the new channel only works if that channel is configured with Voice Announcement.
7.21.2
Mission Critical Geofence
This feature allows the radio to use the GPS receiver to determine radio location at frequent intervals and
evaluate if the radio is within the Geofence area in real time.
Check with your dealer or qualified technician to program the geofence coordinates and actions.
7.21.3
Entering Mission Critical Geofence
When and where to use:
When the radio enters the predefined Geofence area, the radio displays <Geofence Alias> with the
intelligent backlight and you hear a Voice Announcement. Zone and channel alias of the Geofence area is
displayed. If the radio is set to manual, you can choose either to proceed with zone and channel change or
cancel the change.
100
to return to Home screen.
Advertisement
Table of Contents
