MN004476A01-AN
Chapter 7: Advanced Features
2. Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3.
or
to List Selection. Press the Menu Select button directly below Sel .
The display shows Select Zone screen.
4.
or
to the required zone. Press the Menu Select button directly below Sel .
The display shows Select Chan screen.
5.
or
to the required channel. Press the Menu Select button directly below Sel .
The display shows Channel updated.
6. Press the Menu Select button directly below Exit to return to Home screen.
7.2.6.3
Deleting a Channel in the Dynamic Zone
Prerequisites: To perform this operation, the radio must be in the Dynamic Zone.
Procedure:
1.
or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone screen.
The display shows the dynamic channels list.
2.
or
to the saved dynamic channel then press the Menu Select button directly below Del.
The display shows Channel deleted screen.
3. Press the Menu Select button below Exit to return to Home screen.
The Home screen shows <Dynamic Zone Channels>.
If the channel deleted is the Home channel, the Home screen shows <Zone Name>"Blank".
7.2.7
Zone-to-Zone Cloning
Zone Cloning clones conventional zones from one radio to another.
You can select the followings zones from a source radio and clone them into a target radio.
●
Clone enabled zones
●
Dynamic Zones
●
Multiple Private Line (MPL)
You can clone the zones by connecting the source radio and target radio with a clone cable.
7.2.7.1
Cloning Zones
Procedure:
1. On the source radio, press the Menu Select button directly below Clon.
2. Press the Menu Select button directly below Sel to select source zone.
54