Table of Contents
Advertisement
MN004478A01-AN
Chapter 7: Advanced Features
7.30.19.2
Changing Password (Optional)
Radios from the Motorola Solutions factory are provisioned with a blank password.
Prerequisites: To access the protected channels, press OK when the Enter Old Password prompts you
to change the password.
Procedure:
1. Press EDIT.
2. Enter the old password.
3. Enter the new password.
4. To accept the entry, enter the new password again.
7.30.19.3
Selecting a Channel within a Zone
Procedure:
1. Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2. Enter the password and press the Menu Select button directly below Ok.
3. Press
or
to select Zn/Ch.
4. Press
or
to select the required zone and press SEL to view the channels.
5. Press
or
to select the required channel and press SEL to access the channel parameter.
The radio displays the channel parameter screen.
6. Press
or
to select the required channel parameter.
7.30.19.4
Changing a Channel Parameter
Procedure:
1. Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2. Enter the password and press the Menu Select button directly below Ok.
3.
or
to scroll through the various information.
4. Press EDIT to edit the channel parameter.
5. Change the parameter value.
6. Press OK to accept the parameter change and return to view mode.
7. Perform one of the following actions and proceed to the next step:
●
or
to select other channel parameters.
●
Press BACK to access a different channel and make any necessary programming changes.
8. Press BACK to return to Zone List Selector.
144
Advertisement
Table of Contents
