Scenario Of Changing From Lte-Enabled Channel To Lte-Disabled Channel - Motorola APX 7000 User Manual

• The definitions of different statuses shown below the Status of LTE screen:
Connecting
The radio is trying to connect to an LTE modem.
Connected
LTE communication is currently on.
Disconnected
LTE communication is currently disconnected.
Disabled
LTE communication is currently disabled on the selected channel.
Off
LTE communication of the radio is currently off.
No Service
No LTE service detected at the current site.
4
Service Error
There is an LTE service error.
4
LTE HW error
There is an LTE hardware error.
4
VPN auth error
Incorrect key installed for VPN.
5
Service fatal error
LTE function has come to a stall.
• The definitions of different statuses shown below the Network of LTE screen:
<Network name>
The currently connected LTE network name.
Unavailable
No LTE network connected currently.
• The definitions of different statuses shown below the Signal Strength of LTE screen:
Please wait
The radio is trying to connect to an LTE modem.
Unavailable
The radio does not have an LTE connection currently.
Rating of the signal strength
You see one of the following rating when LTE is connected:
Excellent > Good > Fair > Poor
2.26.6
Scenario of Changing from LTE-enabled Channel to LTE-disabled
Channel
When entering a non-LTE channel the status field in the LTE screen shows Disabled. Press or press
and hold of the LTE button prompts short, low-pitched tone.
If the display is showing LTE screen when entering the LTE-disabled channel, the display returns to
Home screen immediately.
4
Bring the radio to the qualified technician to check the issue if the error persists.
5
You can try to power on your radio again to reinitiate the LTE function. If this error persists, bring
your radio to the qualified technician to verify the issue.
6875945M01-NL
Advanced Features
149