Table of Contents
Advertisement
Adjusting the Volume of the Radio from
Bluetooth Audio Device
Ensure that the Bluetooth audio device is connected to the
radio.
Your radio can only control the volume of MCW and OCW
Bluetooth enabled audio device. If the radio is paired with
other Bluetooth enabled audio device, its volume is
independent from the APX radio. In this case, the volume is
only adjustable on the device.
Adjust volume up/down on the Bluetooth audio
device.
The radio display shows Volume XX, and you hear a
short, medium-pitched tone.
Viewing and Clearing the Bluetooth
Device Information
1
or to BT. Press the Menu Select button directly
below BT to access the Bluetooth feature screen.
2
or
to Devices.
Once the display highlights the Devices, the display
shows XX connected alternates with XX paired.
3 Press the Menu Select button directly below Sel.
4 If there are devices being paired or connected,
along the list of <Device Friendly Name> to
see the status of each device.
If there are no active Bluetooth devices being paired
or connected, the display shows No devices.
5 Perform one of the following actions:
•
To clear the device from the list,
required device, press the Menu Select button
directly below Clr.
•
To exit from this function, press the Menu Select
button directly below Back to return to the
previous screen without deleting the device
name.
If Clr is selected, the display shows <Device
Friendly Name> clear?.
English
or
or
to the
173
Advertisement
Table of Contents
