[Ep Proxy Server Setup] - Fuji Xerox ApeosPort-VII CP4421 User Manual

7 Advanced Settings
 [HTTP Proxy Server Password]
Enter a password of the HTTP proxy server.
 [HTTPS Proxy Server Name]
Enter the HTTPS proxy server name or the IP address. Up to 255 characters are allowed.
You can specify the addresses by IPv4 address, IPv6 address, and FQDN.
 [HTTPS Proxy Server Port Number]
Set the HTTPS proxy server port number.
Important
 Do not use the numbers assigned to the other ports.
 [HTTPS Proxy Server Authentication]
Select [Enabled] when authentication is required to connect to the HTTPS proxy server.
 [HTTPS Proxy Server Login Name]
Enter a login name of the HTTPS proxy server.
 [HTTPS Proxy Server Password]
Enter a password of the HTTPS proxy server.

[EP Proxy Server Setup]

Configure the settings for a proxy server for EP connection when the EP system via the
Internet is used.
Important

Configure the settings when the EP system via the Internet is used.
Reference

For information on EP system, refer to "EP System" (P.314).
[Proxy Server Setup]
Set the method of the proxy server specification. Selecting [Different Proxy for Each
Protocol] configures the HTTPS proxy server and the HTTP proxy server respectively.
Selecting [Same Proxy for All Protocols] copies the settings for the HTTPS proxy server to
those of the HTTP proxy server.
[HTTPS Proxy Server Name]
Enter the HTTPS proxy server name or the IP address. You can specify the addresses by IPv4
address, IPv6 address, and FQDN.
[HTTPS Proxy Server Port Number]
Set the HTTPS proxy server port number from 1 to 65535.
Important
 Do not use the numbers assigned to the other ports.
[HTTPS Proxy Server Authentication]
Select [Enabled] when authentication is required to connect to the HTTPS proxy server.
[HTTPS Proxy Server Login Name]
Enter a login name of the HTTPS proxy server. Up to 31 characters are allowed.
154