Fuji Xerox ApeosPort-VII CP4421 User Manual page 278

13 Appendix
ESC/P Mode Menu Items
The following tables show the basic and extended settings that can be configured on the
ESC/P emulation mode menu.
Basic Settings
Setting Item
Number
Output color
Paper tray
Document size
Orientation
284
Item
5 [0](Default): Color
[1]: Monochrome
3 [0]: Auto
[1] (Default): Tray 1
[2]: Tray 2
[3]: Tray 3
[4]: Tray 4
[5]: Tray 5
Note

When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1 Tray 2  Tray 3
 Tray 4 . If paper of the same size is loaded in multiple trays but in different
orientations, feeding of the paper loaded in the landscape orientation is prioritized.
1 [99](Default): Paper
[100]: Continuous form paper (10x12")
[101]: Continuous form paper (10x11")
[102]: Continuous form paper (15x12")
[103]: Continuous form paper (15x11")
[3]: A3
[4]: A4
[5]: A5
[14]: B4
[15]: B5
[21]: 8.5 x 14"
[22]: 8.5 x 13"
[23]: 8.5 x 11"
[24]: 11 x 17"
[0]: Postcard
Note

When a continuous form paper is selected for [Original Size], [Paper Position]
cannot be set.

When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge], the device
automatically calculates the magnification based on a combination of [Original
Size] and [Paper Size]. If the ratio, however, is outside the range of 45-210%, the
document will not be reduced/ enlarged, and will be printed at a scale of 100%.
When [2 Up] is selected, the device automatically calculates the magnification
based on a combination of [Original Size] and 1/2 of [Paper Size].
19 [0](Default): Portrait
[1]: Landscape
Note

The orientation set here is that of the document. It is not affected by the
orientation of paper loaded in the paper trays.
Value