Table of Contents
Advertisement
7 Advanced Settings
[Mask User ID (***)]
You can set how an entered user ID is shown on the screen. Use this feature to enhance
security as required.
When you select [Show], the characters you enter are echoed on the screen in the normal
way as you enter the user ID. When you select [Hide], the characters you enter is hidden as
a row of asterisks (*****) as you enter the user ID.
[Failed Access Log]
Set the failure count to detect unauthorized access. An error is logged if authentication fails
the number of times specified here within a predetermined time (10 minutes).
[Logout Confirmation Screen]
Set whether or not to display a logout confirmation screen every time a user session ends.
[User ID for Login]
Set whether or not to make the user ID entry field on the user login screen case-sensitive.
When you select [Case Sensitive], authentication is performed using the User ID as
registered (including upper and lower cases). When you select [Non-Case Sensitive],
authentication is performed with case ignored even if the user ID has both upper and lower
cases.
Important
Do not change the setting while a file is stored for the Private Charge Print. Otherwise, you may encounter
problems, such as being unable to print. Change the setting after the device prints all the files stored.
Selecting [Non-Case Sensitive] makes the pairs of IDs like "ABC" and "abc" the same ID so do not switch the
setting when such pairs are contained. Changing to [Non-Case Sensitive] may cause problems like some users
are not displayed. Before changing the setting, correct those User IDs to distinguish them.
[Smart Card Reader]
Set whether or not to enable user ID authentication when [Log In to Local Accounts] is
selected and the IC Card Reader (optional) is connected.
Selecting [Smart Card Login] disables the user ID authentication. Selecting [Smart Card /
Control Panel Login] disables both smart card authentication and user ID authentication.
[Account Auto Setup for Card Login]
Set whether or not to register new user information when [Log In to Local Accounts] is
selected and an unregistered user holds a card over the IC Card Reader (optional).
Selecting [Disabled] cancels registering users. Selecting [Enabled] automatically accepts
registering users.
Note
When [Enabled] is selected, [User Name], [Usage Limit], and [Add To Authorization Group] will be displayed.
When [Password for Smart Card Login] under [Device] > [Authentication / Accounting] > [Authentication /
Security Settings] > [Authentication] > [Password Policy] is set to [On], you need to enter the password twice
for the auto assign.
[Guest User]
Set whether or not to permit a guest user when [Log In to Remote Accounts] is selected.
170
Advertisement
Table of Contents
