Weekly Timer - Maktek OMEGA LCD Installation And Service Manual

5.2.4 WEEKLY TIMER

Maktek Omega LCD boiler's weekly timer function enables you to set automatic operation
time intervals for each day of the week seperately.
Press P1 knob to enter the main menu and scroll to the Week Timer menu to select wtih
P1. Inside the week timer menu, there is an adjustment clock which can be set seperately
for each day of the week. When the selection cursor is on the DAY tab, you can choose
the day you want to make a setting for by turning the P2 knob. Once you get to the
desired day, press P1 to activate timer for that day. Active box will be filled.
Turn the P1 knob to scroll the cursor though the clock. Mark the time intervals by pressing
on P1. Your boiler will operate automatically in the marked time intervals for that day.
Once you finish setting for that day, use P1 knob to scroll back to the DAY tab and choose
the other day you want to set the timer by turning P2. Press P1 to activate timer for that
day and adjust the operation time intervals as instructed.
Once you finish all the adjustments, move the cursor to back tab and press P1 to return to
the main menu. Your adjustments will be saved.
When your boiler is set to operate automatically with week timer function, icon is
shown on the LCD screen on days with a week timer operation interval adjustment.
During automatic operation with week timer, the boiler will operate at the set temperature
values on the control panel. Week timer will instruct the boiler to turn and off according to
the settings.
CAUTION! : In week timer function, when the active box is filled for a day, the boiler will
only operate in the adjusted time intervals for that day.
If you activate the week timer, tick the active box but do not make any operation interval
markings, the boiler will not work for that day. Make sure to make the time interval settings
accurately.
Week timer active
39