Table of Contents
Advertisement
5.2.3.4 Weather Compensation
MAKTEK Omega LCD boiler has a automatic operation feature with weather
compensation when an optional ambient temperature probe is connected. When
this probe is installed to your boiler by an authorized service, ambient temperature
icon, ambient temperature value and weather compensation coefficient curve icon
will be shown on the LCD screen.
When the ambient temperature probe is connected, weather compensation menu will be
activated inside the system settings menu. In this menu you can enable or disable the
automatic operation with weather compensation function. When disabled, the boiler will
resume operation accoring to the adjustments made on the control panel. Only ambient
temperature icon (will not show the ambient temperature value) will be present on the
LCD screen when weather compensation is disabled. Also in this menu you can change
the weather compensation curve coefficient. This curve coefficient is used to increase or
decrease the heating capacity of the boiler in automatic mode, depending on the
insulation level of your home, location or your comfort preferances. Weather
compensation curves and corresponding boiler water temperatures are given on page 38.
1
2
37
3
4
Advertisement
Table of Contents
