Table of Contents
Advertisement
5. USER INSTRUCTIONS
5.1 CONTROL PANEL
A
DID
B
All functions required to run the boiler is done via two adjustment knobs and and on/off
button on the control panel. All operation parameters and adjustments can be followed on
the LCD screen. All failure reports are shown on the LCD screen with codes and
explanations.
A. ON/OFF - HOME SCREEN BUTTON:
This is the on/off button for the boiler. Returns to the main screen whilst pressed inside a
menu.
B. P1 KNOB :
On the operation screen, turn this knob to adjust the central heating water temperature
between 30-80°C. Press on this knob to enter the main menu. You can turn this knob to
scroll through the sub menus and press on the knob again to enter in the selected sub menu.
In case of a failure that requires a manual reset, pressing on P1 knob will perform the
manual reset.
C.P2 KNOB:
On the operation screen, turn this knob to adjust the domestic hot water temperature
between 30-60°C. Inside the settings menus, adjustment of desired values and parameters
are done by turning this knob.
P2 knob is also used as a shortcut to change the boiler operation mode. Press and hold for
3 seconds on P2 knob to switch the boiler operation mode between; only heating, winter
mode (heating + DHW) or summer mode (only DHW).
Reset
Mode
31
Omega
D
1111
C
Advertisement
Table of Contents
