System Settings - Maktek OMEGA LCD Installation And Service Manual

Inside this menu, you can select the desired operation mode by turning P2 knob.
When you complete your selection, you can press on P1 to return to the main menu or
press the home (on/off) button to return to operation screen.
Boiler only works in CH
mode to heat the
radiators or the
underfloor heating
installation.
• While the boiler is in operation screen you can switch between operation modes by
pressing on and holding the P2 knob for 3 seconds as a shortcut.
NOTE: In Heating+DHW mode, the DHW supply is prioritised.

5.2.3 SYSTEM SETTINGS:

Press the P1 knob to enter to main menu. Scroll to system settings tab by turning P1 and
press P1 to enter into system settings menu. Below shown sub menus are present in
system settings menu.
Summer mode only
delivers domestic hot
water from faucets and
showers. Space heating
is disabled.
Main Menu
System Settings Sub Menus
35
Standart operation
mode of the boiler.
Supplies hot water both
for space heating (CH)
and DHW.