3.8 ELECTRIC CONNECTION
The electricity connection of the boiler must be made by a quailified electrician.
Improper electric connections made by unqualified people may cause failure of critical
components of the boiler and will invalidate the warranty.
DANGER ! Electric Shock Risk
Make sure to cut off main energy supply before starting to work on the boiler.
Secure the main energy supply to prevent from turning on while working on
the boiler.
3.8.1 Electricity Connection Precautions
• All wiring must be carried out in accordance with current wiring regulations.
• All electricial connections must be made by a qualified electrician.
• We recommend that a load check is carried out when installing high power
boilers.This must be done by a qualified electrician. Upgrading the main fuse of the
property may be required.
• A proper earth connection must be made before operating the boiler.
3.8.2 Electricity Supply Connection
• The main electricity cable of the boiler should be connected to the RCD device
and main circuit braker according to the below diagrams.
• Electricity supply connection must be made according to the cable sizes indicated
on the boiler technical label.
6-40kW
Blue
N T S R
RCD
Device
21
N T S R
Blue
Circuit
Breaker