Table of Contents
Advertisement
SAFETY INSTRUCTIONS
3
Please take care of the following basic safety procedures when mounting, starting up or operating this
equipment:
Read this operating manual before starting up and use of the equipment. The information and warnings given in
this operating manual must be heeded.
Any work on electrical equipment is only to be carried out by trained specialists as per the regulations currently in
force.
Attention must be paid to the requirements of VDE 0100 (IEC 364) when setting high-power electrical units with
nominal voltages of up to 1000 V, together with the associated standards and stipulations.
Check the details on the type plate to ensure that the equipment is connected to the correct mains voltage.
Protection against touching dangerously high electrical voltages:
Before opening the equipment, it must be switched off and hold no voltages. This also applies to any external
control circuits that are connected.
The device is only to be used within the permitted range of temperatures and pressures. For details please refer to
the technical data sheet or instruction manual.
Check that the location is weather-protected. It should not be subject to either direct rain or moisture.
The peristaltic pumps SR25.1 and SR25.2-G must not be used in hazardous areas.
Installation, maintenance, inspections and any repairs of the devices must be carried out only by qualified skilled
personnel in compliance with the current regulations.
3.1
INTENDED USE
The peristaltic pumps SR25.1 and SR25.2-G are intended for use in general purpose areas (non-hazardous
environments) only.
The peristaltic pumps SR25.1, SR25.2-G und
SR25.1/Ex can only be operated in compliance with the information
starting in chapter 7. You must meet the requirements of the ambient temperature and pressure characteristics in
particular.
Do not use this product for any other purpose. Improper use and handling can create hazards and cause damage.
For more information, please refer to the safety information in this instruction manual.
www.mc-techgroup.com
SR25 | 1.01.01
5
Advertisement
Table of Contents
