Appendix - M&C SR Series Instruction Manual

APPENDIX

20
• Spare part drawings SR25.1 and SR25.2
• EC-type examination certificate SR25.1/EX, SR25.2/EX and SR25.3/EX
Further product documentation can be seen and downloaded from our home page:
www.mc-techgroup.com
24
Caution electric shock
Risk rank group C
When installing high-power systems with nominal voltages of up to 1000 V, the
requirements of VDE 0100 and their relevant standards and regulations must be
observed!
This also applies to any connected alarm and control circuits. Before opening the
products, they must always be disconnected from the power supply.
Gas hazard
Risk rank group A-B-C
The hazard potential mainly depends on the gas to be extracted.
If toxic gases, oxygen displacing or explosive gases are conveyed with the product, an
additional risk assessment by the operator is mandatory.
In principle, the gas paths must be purged with inert gas or air before opening the gas-
carrying parts.
The escape of potentially harmful gas from the open process connections must be
prevented.
The relevant safety regulations must be observed for the media to be conveyed. If
necessary, flush the gas-carrying parts with a suitable inert gas. In the event of a gas
leakage, the product may only be opened with suitable PPE or with a monitoring system.
Furthermore, the work safety regulations of the operator must be observed.
SR25 | 1.01.01 www.mc-techgroup.com