Cisco 8011-2X2XP4L Hardware Installation Manual page 8

Standard Warning Statements
Warning
Statement 1006 Chassis Warning for Rack-Mounting and Servicing
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
Warning
Statement 1022 Disconnect Device
To reduce the risk of electric shock and fire, a readily accessible disconnect device must be incorporated in
the fixed wiring.
Warning Statement 1024 Ground Conductor
This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suitable grounding is available.
Warning Statement 294 Class A Warning for Korea
This is a Class A device and is registered for electromagnetic compatibility (EMC) requirements for industrial
use. The seller or buyer should be aware of this. If this type was sold or purchased by mistake, it should be
replaced with a residential-use type.
Warning Statement 1049 Rack Installation
To reduce the risk of bodily injury, mount the chassis on a rack that is permanently affixed to the building.
Warning Statement 9001 Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Hardware Installation Guide for Cisco 8011-2X2XP4L PLE Service Endpoint Router
2
heaviest component at the bottom of the rack.
unit in the rack.
Safety Warnings