Module Programming; For Security-Only Programming, See Next Section - Directed DS3+ Installation Manual

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
For Security-Only programming, see next section.
Ensure vehicle is in a safe location and cannot move forward during programming. For
1
vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral
position.
DS3+: Connect the 12-pin main power harness to the DS3+ module FIRST.
Wait until the LED turns ON solid red before proceeding to the next step.
2
DS4+: Connect the 12-pin main power harness to the DS4+ module FIRST.
The LED will turn ON solid blue for 1 second to confirm Bluetooth communication.
Wait until the LED turns ON solid red before proceeding to the next step.
3
Connect the remaining harnesses to the module.
4
Press the Unlock button on the OEM remote.
Important! Do not depress the brake pedal.
5
Press the Push-to-Start button twice (2x) to turn the ignition ON.
The LED flashes orange while the module is being programmed.
Once the configuration is completed, the LED turns ON solid green for 3 seconds, then turns
6
OFF.
7
Press the PTS button one time (1x) to turn the ignition OFF.
Pair remotes (if applicable).
For information on how to pair a specific remote, please refer to its corresponding owner
8
documentation, which can be found inside the product packaging of the complete system or
on www.directechs.com.*
DATA/Hardwired Tach Learning: When using Data Tach, it is recommended to follow the
Tach Learning procedure. However, when using a Hardwired Tach, the procedure is
9
mandatory.
For more information, refer to the Tach Learning procedure section.
* Your aftermarket remote may differ from the model shown in the illustrations.
You have successfully completed the module programming sequence.
11
933.POR02EU 1.01.193.2 2019 Porsche Cayenne (Smart Key) EU
©2023 Directed. All rights