Directed Directechs DS3 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. Directechs DS3
  6. Installation manual
Directed Directechs DS3 Installation Manual

Directed Directechs DS3 Installation Manual

For mercury grand marquis. 933.ford1 4.17.193.2
Hide thumbs Also See for Directechs DS3:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
DS3+ / DS4+
2005 Mercury Grand Marquis. 933.FORD1 4.17.193.2
Designed by Installers for Installers
© 2021 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.

Advertisement

Table of Contents
loading

Related Manuals for Directed Directechs DS3

Summary of Contents for Directed Directechs DS3

  • Page 1 2005 Mercury Grand Marquis. 933.FORD1 4.17.193.2 Designed by Installers for Installers © 2021 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Connecting the module Important! 8556T Temperature Sensor 8504D Combo Sensor RF Systems When used in conjunction with SmartStart D2D port configuration Manual transmission Module programming 2-Key programming NO Key2GO 1-Key programming using Key2GO...

  • Page 3: Introduction

    Introduction DS3+ is a complete solution for remote start, security (when security features are enabled) and bypass. This guide provides information on the installation of the module as a digital solution. Please refer to www.directechs.com for more information about which configuration is best for your application. Warning! This module can be configured using the web tool located at www.directechs.com.

  • Page 4: Pre-Installation And Application Warnings

    Pre-installation and application warnings Firmware notes: This section highlights important information for this specific firmware and will assist in pricing accordingly, as well as bringing awareness to any operational or vehicle limitations. Keys T-Harness Keys required 1 or 2 required for compatible for operation programming...

  • Page 5: Wiring Diagram

    Wiring diagram Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( OBDII Diagnostic Connector, under Driver Dash (connector side view) HS CAN High, pin 6 HS CAN Low, pin 14 HS CAN Low: Orange/Brown: 3 HS CAN High: Orange/Green: 4 RX: Orange/Black: 7...

  • Page 6: Locating Components In The Vehicle

    Locating components in the vehicle 933.FORD1 4.17.193.2 2005 Mercury Grand Marquis ©2021 VOXX•DEI LLC. All rights reserved.

  • Page 7: Vehicle Connections

    Vehicle connections The connection information listed below is specific to the 2005 Mercury Grand Marquis. Refer to “Pre-installation and application warnings” for a list of important notes. Data harness, 8-pin white connector (H1) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection...
  • Page 8 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H2/9 Dk. Blue/Black (-) Door Unlock Output driver kick, door harness pink/lt. green Mandatory Must use a relay. wire Must use a diode. or + This firmware has negative outputs for this function. Vehicles with positive and/or 5-wire/reverse circuits REQUIRE an optional relay.
  • Page 9 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H3/9 Lt. Green/White Relay N.C. No Connection No Connection H3/10 Black (-) Ground (chassis ground) Mandatory H3/11 White Relay COM (+) Parking Light Output LCM right of steering column, black 16 pin plug, pin 4 brown Mandatory H3/12...
  • Page 10 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H7/1 Black Temperature Sensor H7/2 Black Temperature Sensor 933.FORD1 4.17.193.2 2005 Mercury Grand Marquis ©2021 VOXX•DEI LLC. All rights reserved.

  • Page 11: Connecting The Module

    Configuring the system DS3+ Flashing the module using your computer: 1. Disconnect the main module from any (+) 12V power source, then connect it to your computer using the XKLoader2. 2. Go to www.directechs.com using Internet Explorer; the configuration wizard will be displayed automatically. Follow the instructions in the pop-up window that will be displayed when the module is detected.

  • Page 12: Rf Systems

    RF Systems An RF System consists of one or multiple remotes, a Control Center (antenna), and an antenna cable – various combinations exist. An RF System allows the vehicle owner to control the system with enhanced range. Two-way models are available. Please follow the instructions included with the kit for appropriate installation and programming information.

  • Page 13: Manual Transmission

    Manual Transmission IMPORTANT! Directed does not approve nor support installations of manual transmission and remote starts on any electronic vehicles (EV), OEM Remote Start Activation firmware, vehicles with convertibles and/or removable tops, including but not limited to Jeep Wrangler, Honda S2000, Mazda Miata, and other such vehicles.

  • Page 14: Module Programming

    Module programming Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes. 2-Key programming NO Key2GO Please ensure that the vehicle is in a safe location, and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral position.

  • Page 15: 1-Key Programming Using Key2Go

    * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 1-Key programming using Key2GO Please ensure that the vehicle is in a safe location, and cannot move forward during programming.

  • Page 16: Module Programming For Security-Only Installations

    Module programming for security-only installations Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes. To connect the module: Please ensure that the vehicle is in a safe location and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral position.

  • Page 17: Led Diagnostics And Troubleshooting

    LED diagnostics and troubleshooting This section provides LED diagnostics and troubleshooting information to guide you through the various stages of your installation. Module Programming Description Troubleshooting Make sure the D2D harness is connected and that 12 Volt is present between the red and black Module has no power.
  • Page 18 External Module Synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 Active Ground When Running (Status) Description Troubleshooting Ground When Running (Status) command The module has initialized the remote start sequence.

  • Page 19: Soft Reset

    Soft reset A module reset will only erase the steps perfomed in “Module Programming”. The firmware and settings flashed to the module will not be affected. Connect all but the If required for your installation, connect all the harnesses to the module, EXCEPT the 12-pin 12-pin harness main power harness.

  • Page 20: Learning The Tach (Not Needed With Virtual Tach)

    Learning the Tach (not needed with Virtual Tach) Tach comes preprogrammed, therefore learning is not required; however, it can be readjusted with the following operations: 1. Start the vehicle using the key. 2. Within 5 seconds, press and hold the Control Center (antenna), the LED/Valet Pod (standalone switch) or the main module programming button until the LED turns ON solid.

  • Page 21: Limited Lifetime Consumer Warranty

    Directed dealer, the unit was professionally installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number and address;...

  • Page 22: Quick Reference Guide

    Factory remote. Press the Remote Start button on the transmitter.* • Aftermarket remote. • Directed SmartStart application via your smartphone. & The parking lights will flash once to indicate the Parking lights flash x1 Press Remote vehicle is now in Pit Stop Mode.
  • Page 23 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.

This manual is also suitable for:

Directechs ds3+Directechs ds4

Table of Contents