Directed Directechs DS3+ Installation Manual
Smart key for 2018 volkswagen passat
Hide thumbs
Also See for Directechs DS3+:
- Installation manual (35 pages) ,
- Installation manual (23 pages) ,
- Installation manual (27 pages)
Table of Contents
Advertisement
Quick Links
Functions compatible with the 2018 Volkswagen Passat (Smart Key)
*Telematics features: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart Pro.
* Odometer
3x LOCK START (Start control using OEM Remote)
3x LOCK STOP (Stop control using OEM Remote)
Accessory Activation
Arm Factory Security
Brake Status (foot brake)
Control of aftermarket alarm with OEM remote
Disarm Factory Security
Door Lock Control
Door Unlock
Driver Priority Unlock
E-Brake Status
Entry Monitoring ALL Door Pins
Entry Monitoring Hood Pin
Entry Monitoring Trunk/Hatch Pin
Fuel level/EV battery level
Ignition Activation
Remote Start Takeover
SmartStart
Start (Crank) Activation
Tach / RPM Output
Trunk / Hatch Release
933.VW09
v2.00.198.12
2018 Volkswagen Passat (Smart Key)
THVWN1 Compatible
(Sold Separately)
Advertisement
Table of Contents
Related Manuals for Directed Directechs DS3+
Summary of Contents for Directed Directechs DS3+
- Page 1 933.VW09 v2.00.198.12 2018 Volkswagen Passat (Smart Key) THVWN1 Compatible (Sold Separately) Functions compatible with the 2018 Volkswagen Passat (Smart Key) *Telematics features: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart Pro. * Odometer E-Brake Status 3x LOCK START (Start control using OEM Remote) Entry Monitoring ALL Door Pins 3x LOCK STOP (Stop control using OEM Remote)
-
Page 2: Table Of Contents
Contents Introduction Pre-installation and application warnings Installation Wiring diagram with T-Harness (THVWN1) Wiring diagram Key wrap options for THVWN1 Immobilizer Interface Locating component in the vehicle Vehicle connections Module programming (For security-only programming, see next section.) Module programming for security-only installations Pairing remotes Connecting the module 8556T Temperature Sensor... -
Page 3: Introduction
To configure via DirectLink mobile app (Android/iOS): 1. Follow and complete the wiring diagram(s) related to your installation through the app. 2. When installation is complete, select Configure DS4/DS4+. 3. Follow the on-screen instructions. 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 4: Pre-Installation And Application Warnings
The siren is ONLY required when enabling the security features during module flashing. For Key Wrap instructions refer to the "Immobilizer interface" section. For security-only installations, refer to the "Locating components in the vehicle" section for Optional starter disable connection. 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 5: Installation
(under driver’s side dash) (brown connector) (+) Brake Activation Output: White 42 25 NOT USED PKL 3 Key 2 Key 3 (+) Brake: Black/Red, pin 17 52 41 24 11 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 6: Wiring Diagram
Parking Lights: Pin 8 Legend: Mandatory Connections Security Only (+) Parking Lights: Pin 3 Remote Start Only Headlight Switch Remote Start + Security (black connector) VESCM (under driver’s side dash) 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 7: Key Wrap Options For Thvwn1
Remove between the Receiver the battery Lock button from the OEM and the Remote Control Flip Key button. loop Test and secure the loops before loop reassembling the vehicle. 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 8: Immobilizer Interface
- Make 4-6 loops and place them around the front of the plastic body of the vehicle’s coded key as shown above. - Test and secure mounted loops before reassembling the vehicle. - When possible use valet key for key wrap, if blade key is used, battery must be removed. 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... - Page 9 - Make 4-6 loops and place them around the front of the plastic body of the vehicle’s coded key as shown above. - Test and secure mounted loops before reassembling the vehicle. 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights...
-
Page 10: Locating Component In The Vehicle
When flashing your module for Remote Start & Security, you must Security Only Remote Start Only manually assign the designated output to Anti Grind (AG) Starter Kill. (Applicable to CORE 194+.) Remote Start + Security 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 11: Vehicle Connections
Pink No Connection No Connection H2/13 Violet No Connection No Connection H2/14 Brown No Connection No Connection H2/15 White/Blue No Connection No Connection H2/16 Red/Blue No Connection No Connection 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... - Page 12 H4/5 No Connection No Connection H4/6 Green No Connection No Connection H4/7 Violet No Connection No Connection H4/8 Orange No Connection No Connection H4/9 Red/White No Connection No Connection 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights...
- Page 13 (+) 12 Volt Temperature sensor harness, 2-pin black connector (H7) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H7/1 Black Temperature Sensor H7/2 Black Temperature Sensor 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights...
-
Page 14: Module Programming
"Initialize Virtual Tach" (not needed with hardwired or data tach applications). * Your aftermarket remote may differ from the model shown in the illustrations. You have successfully completed the module programming sequence. 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 15: Module Programming For Security-Only Installations
Your aftermarket remote may differ from the model show in the illustration. You have successfully completed the module programming sequence. 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 16: Pairing Remotes
When used in conjunction with Directed SmartStart ® To enable D2D communication between the DS3+/DS4+ and the Directed SmartStart one of the following actions must be performed ® before providing power to the Directed SmartStart unit: ®... -
Page 17: When Used In Conjunction With Smartstart
DO NOT connect the Directed SmartStart 2-pin power harness when using the DS3+/DS4+. Power and ground will be provided by the ® D2D connector on the module. Refer to the Directed SmartStart documentation for further details. ® D2D port configuration Caution! Do not connect the Control Center (antenna) or any digital sensors (8504D) to the white D2D1 port. -
Page 18: Manual Transmission
Manual Transmission IMPORTANT! Directed does not approve nor support installations of manual transmission and remote starts on any electronic vehicles (EV), OEM Remote Start Activation firmware, vehicles with convertibles and/or removable tops, including but not limited to Jeep Wrangler, Honda S2000, Mazda Miata, and other such vehicles. -
Page 19: Led Diagnostics And Troubleshooting
Flashes red x 11 BCM programming. Failed to program the BCM. Check if doors are locked. They need to be unlocked to solve the problem. Flashes red x 12 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... - Page 20 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights...
-
Page 21: Soft Reset
DS3+: Release the programming button. The LED turns solid red. & Solid Release DS4+: Release the programming button. The LED turns ON blue for 1 second then solid red. & & Solid Solid x1 Sec Release 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 22: Tach Learning Procedure (Not Needed With Virtual Tach)
Therefore, there is no Over-Rev protection. If the vehicle attempts to remote start, but is unsuccessful, the remote start will keep the ignition on for the entire runtime period. 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 23: Limited Lifetime Consumer Warranty
This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 933.VW09 2.00.198.12 2018 Volkswagen Passat (Smart Key) ©2023 Directed. All rights... -
Page 24: Quick Reference Guide
Factory remote. Press the Remote Start button on the transmitter.* • Aftermarket remote. • Directed SmartStart application via your smartphone. & The parking lights will flash once to indicate the Parking lights flash x1 Press Remote vehicle is now in Pit Stop Mode. - Page 25 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet.