Winbook XP5 User Manual page 84

After you create a new partition you can restore,you system configuration from the backup.
You can back up your hard disk either by copying your data to floppy
disks, to another computer on a network, or to a stand-alone desktop PC. disk drive, so you
must back up Here's a sample of the procedure for using PHDisk: your system first, as all data
on it 1. Back up everything on the hard disk using a commercial back-up
will be destroyed in the process. utility (purchased separately.)
If you purchased your WinBook
with 32MB of system memory, 2. Make a bootable floppy disk using the'Startup Disk' section
of
the partition will already have 'Add/ Remove Programs' in the Windows Control Panel. been
set at the factory.
PLEASE CALL WINBOOK 3. Set the boot drive order
TECHNICAL SUPPORT BEFORE Run the system Setup program and on Page 1 Standard
Setup,
ATTEMPTING TO USE PHDisk.select the "Boot Drive Order" to be "A: C:". Press 'Esc' and
the 'Alt' + 'F4' to save the new configuration.
4.Place XP5 Support floppy disk in drive and reboot from Drive A: Shut down Windows
to the DOS command line then hold down the 'Ctrl' and 'Alt' keys and type 'Del' to reboot
the computer and boot from the floppy disk in Drive A:.
5.Run PHDisk, delete old Suspend-To-Disk partition if necessary
Type "PHDISK" at the A: command line. A list of options willSYOM
appear. Delete the Suspend-To-Disk partition, delete it by typingUse this procedure to access
the
"PHDISK /DELETE" and pressing'Enter'.system Setup program:1.Turn on the computer.
6.Create a new Suspend-To-Disk partition2. When you see the 'Starting
Type this command:Windows' message
"PHDISK /CREATE /VRAM 1024"immediately press the F8 key
Press 'Enter'. The program will automatically determine the re-to bring up the Windows . '95
quired size for the partition. It will take some time to complete theboot options screen.
task. When complete, you will be back at the drive A: DOS prompt.3. Press the Cntri-Alt-S key