1. Manuals
  2. Brands
  3. Winbook Manuals
  4. Laptop
  5. XLi
  6. User manual

Winbook XLi User Manual

Winbook xli: users manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

User' s
Manual
for WinBook XLi notebook computers

Advertisement

Table of Contents
loading

Related Manuals for Winbook XLi

Summary of Contents for Winbook XLi

  • Page 1 User’ s Manual for WinBook XLi notebook computers...

  • Page 2: Table Of Contents

    Hardware — Inventory ....... . . 1.3 The WinBook XLi Port, Bay, Connector, Indicator Descriptions.
  • Page 3 CMOS Battery Replacement ......3.4 Power Management— WinBook XLi Low Power Measures; Standby versus Suspend.
  • Page 4 Chapter 6: Upgrading ......6.1 Memory ..........6.2 Swappable Drives —...
  • Page 5 WinBook XLi User’s Manual Table Contents TOC.4 Chapter 8: Troubleshooting (continued) Audio ..........8.9 CD-ROM .

  • Page 6: Fcc Statement

    Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. Their limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica- tions.

  • Page 7: Conventions Of This Manual

    Using this manual will help you get the most from your WinBook computer. Keep the manual and the “Read Me First” card with your WinBook XLi to refer to when you want information and help. If you are an experienced user of computers and/or Windows useful to read Chapter One on the features specific to your WinBook XLi and then take advantage of the hypertext “WinBook XLi Help”...
  • Page 8 In order to get the optimal usage out of your WinBook XLi, you should remember the following: • Read through all the instructions for your WinBook XLi, including this manual and the “Read Me First”...
  • Page 9 WinBook XLi User’s Manual ducts. Keep the computer away from sources of excessive moisture. Damage to the computer caused by immersion is not covered by the warranty. • When cleaning the computer or its components, apply the proper cleaning solutions or sprays only to the cloth, not to the computer or its components.
  • Page 10 Preface...
  • Page 11 WinBook XLi User’s Manual The information in this document and the associated WinBook XLi Help file is subject to change without notice and should not be construed as a commitment by the manufacturer. The manufacturer assumes no responsibility for any errors or omissions that might appear in this document or the associated WinBook XLi Help file.

  • Page 12: Chapter 1: Getting Started

    Chapter 1: Getting Started Chapter One: Getting Started...
  • Page 13 Consult your doctor or other health professional for medical advice on how to reduce your risk of injury or discomfort from continuous keyboard use. Your WinBook XLi has all the power and can perform all of the functions of a desktop computer, but its slim design and light weight provide you with portability that can free you to use the computer almost anywhere you go.

  • Page 14: Hardware Inventory

    When you unpack your WinBook XLi, check that all the items that you ordered are present and in good condition. Check the inventory checklist that came in the WinBook XLi box to be sure that all the components and optional components that you ordered are included. If anything is missing or damaged, contact Customer Service immediately (the Customer Service number can be found on the “Read Me First”...
  • Page 15 PC cards, USB devices, printers, etc. The WinBook XLi Before you begin using your WinBook XLi, you should take a moment to familiarize yourself with the various ports, bays, connectors, and indicators that make up your system.
  • Page 16 The back of the system has two doors that cover I/O ports for your WinBook XLi. (Figure 1.3) The door on the left flips down and slides in to reveal the docking port of your system. This door should be closed when the system is undocked.
  • Page 17 WinBook XLi User’s Manual Figure 1.3 Rear View of the WinBook XLi Port Replicator Release AC Connector Figure 1.4: Rear View of the WinBook XLi, with Doors Open AC Connector Port Replicator Connector Serial Port TV-out PS/2 Port USB Port The 80-pin Port Replicator Connector provides a connection to an optional port replicator.
  • Page 18 The 9-pin Serial Port provides a connection for serial devices, including a serial external mouse. The serial port is designated as COM1. The TV-out port allows you to connect your WinBook XLi to a television receiver and direct the screen output to that receiver.
  • Page 19 You can obtain adapters that will allow you to connect a phone to the same line as your WinBook XLi. The floppy disk drive is built into your system, but it can be removed to allow access to the removable hard drive.
  • Page 20 Figure 1.6: Bottom view of the WinBook XLi. CD-ROM Upgrade Access Panel Battery Release The memory compartment covers are secured by two screws that fit through holes in the forward memory compartment cover. Once these screws are removed, the forward cover can be moved and lifted from the case. This will then allow the rear cover to be removed from its compartment.
  • Page 21 WinBook XLi User’s Manual 1.10 INDICATORS, MICROPHONE, SPEAKERS and POWER BUTTON The power button for your system is located just above the keyboard on the right hand side. The built-in speakers are located at the right and left edges of the system, just above the keyboard.
  • Page 22 The power LEDs located on the hinge of the display panel indicate the cur- rent power use and battery status of your WinBook XLi. The functions of these LEDs are indicated by icons: a plug, a battery and a battery with a line through it (left to right).

  • Page 23: Power On

    In certain programs, this will prevent the screen from scrolling. Power On The first time you use your WinBook XLi, use your AC power adapter. This will allow your battery to fully charge. It is recommended that you then allow the battery to fully discharge and recharge three times. This will help calibrate the electronics that monitor and maintain the battery charge.
  • Page 24 Your system should pass right through the memory tests and setup to start loading Windows 95. When you first start your new WinBook XLi, you will need your Windows 95 manual. On its cover is your registration number for Windows 95.
  • Page 25 If you explore the start menu, you will also notice a WinBook folder in the program groups. This folder holds your WinBook XLi Help file and possibly other files that contain information about your WinBook XLi.

  • Page 26: The Keyboard

    If you are not familiar with the computer control keys, the major ones are discussed below. Figure 1.9: The XLi Keyboard (Shown with pointing stick available on selected models.) The [Alt] and [Ctrl] keys, like the [Shift] key alter the function of the tradi- tional typing keys and the function keys.
  • Page 27 Keyboard System Controls In addition to its function as a normal keyboard, your keyboard also con- tains controls for various aspects of your WinBook XLi, including the intensity of the LCD screen. These controls appear in green on the keys...
  • Page 28 tion (or by holding the [Fn] key while pressing the key for the specific control function). KEYS FUNCTION(S) [Fn]+[F1] Puts the LCD display into a standby mode [Fn]+[F2] If an external monitor or television receiver is present, you can toggle 1) to an external monitor, 2) to a TV receiver, only if configured in the Setup program, 3) to a simultaneous display on the screen and a monitor, and 4) back to the built-in screen.

  • Page 29: Mouse Buttons & Pointing Devices

    You can also tap lightly on the touchpad, which the system will recognize as a left mouse click. Use of an external pointing device with your WinBook XLi is discussed in Chapter Four.

  • Page 30: Lcd Display

    LCD Display Your WinBook XLi comes with a back-lit LCD display panel. The intensity of the panel will vary slightly with your angle to the screen. You can adjust the angle of the panel to provide optimal clarity. You can also adjust the brightness of the screen by using the [Fn]+[F6] key combination (to darken the screen) or the [Fn]+[F7] key combination (to brighten the screen).
  • Page 31 WinBook XLi User’s Manual 1.20 However, you can use a higher resolution when you output the notebook’s video to an external monitor that supports high resolutions. You can quickly adjust the resolution and number of colors settings through Windows 95’s Display Properties window. To open this window, locate the display icon on the taskbar (the video screen icon).
  • Page 32 Chapter Four on using an external monitor. Battery & Power Saving When the AC Adapter is connected to your WinBook XLi, your battery will charge whether the computer is on, off, or in the power saving mode. It will, however, charge much faster if the computer is off.

  • Page 33: Control Panel

    Windows 95 sessions. POWER MANAGEMENT Your WinBook XLi should run for over two hours on a single, fully charged battery and longer if power management is employed. The key to obtaining optimal battery life for your system is effective power manage- ment.
  • Page 34 Audio/Sound Built-in Speakers Your WinBook XLi comes with built-in audio hardware that plays sounds through the speakers built into the cabinet of your system. You can adjust the hardware volume as explained in the keyboard section above. You can also adjust the software controls of the audio through Windows 95.

  • Page 35: Cd-Rom Drive

    1.24 Built-in Microphone The microphone built into the case of your WinBook XLi provides you with an integrated source for adding sound to your applications or for using the speech functions of your applications. You will need applications capable of using such sound input to make use of the microphone.
  • Page 36 5. Be sure to carefully center the CD and press it into place on the loading tray. Since your WinBook XLi is meant to be portable, the CD is secured onto the tray rather than simply resting in a recess.
  • Page 37 If you purchased some other software, or if you already own software that you will be installing on your new WinBook XLi system, or if you buy software at a later date, you will need to know how to install that software on the WinBook XLi system.
  • Page 38 instructions. You can also use the instructions provided by the software manufacturer, which will usually involve clicking on Run in the Start menu and typing in the necessary program information. To complete the installation of the software programs you should follow the instructions provided with the software.
  • Page 39 WinBook XLi User’s Manual 1.28...

  • Page 40: Chapter 2: Basic Computing

    Chapter 2: Basic Computing Chapter Two: Basic Computing...

  • Page 41: Ram

    The Winbook XLi is designed to be run straight out of the box, so, if you are an experienced computer user, you should be ready to go. You can find additional information about specific features of your system in the chapters that follow and in the WinBook XLi Help File in the WinBook folder on your hard drive.

  • Page 42: Hard Drives

    When you place your WinBook XLi in the Suspend mode, it will use a small amount of battery power to keep the RAM active while shutting down the other elements of your system. When you resume using the system, your active sessions in RAM will be available just as you left them.
  • Page 43 WinBook XLi User’s Manual Figure 2.2: C: drive properties You can also find out the capacity, used space and avail- able space on the C: drive by selecting the C: drive in the My Computer window. You can select an item by click- ing on that item.
  • Page 44 It is also a good idea to check your hard disk on a periodic basis for disk errors that can lead to data loss. The ScanDisk utility in Windows 95 (Start/Programs/Accessories/System Tools/ScanDisk) provides a means of checking your system for such errors. Information about using this utility can be found in your Windows 95 documentation.

  • Page 45: The Device Manager

    WinBook XLi User’s Manual Figure 2.5 Device Manager. The Device Manager While the Setup program (see Chapter Seven) tells your computer what equipment it is running, the Windows 95 Device Manager tells the operating system what equipment it is running. It is a good idea to learn about the various components of your system and how they operate.

  • Page 46: Data Handling

    You can get to the Device Manager through the System icon in the Control Panel (Start/Settings/Control Panel) or by right-clicking the My Computer icon on the desktop and selecting Properties. In the System Properties window, click the Device Manager tab You can use the plus signs beside the device category to expand the category and reveal the actual devices that fall into that category.
  • Page 47 WinBook XLi User’s Manual You should save your files often when you are working (about every 15 minutes or so). This will prevent you from losing hours of work that has not been saved. You can also use autosave or timed-save functions in your software for this purpose.
  • Page 48 Data is stored on diskettes as magnetic fields. Your WinBook XLi system came equipped with a 3.5" drive that installs in the media bay. To read data from or write data to your diskette, insert your diskette into the drive.

  • Page 49: Windows 95 Functions

    CD. Windows 95 Functions Your WinBook XLi ships with the Windows 95 Active Desktop option. This desktop differs from the older Windows 95 desktop in (Fig. 2.6) several ways: •...
  • Page 50 Internet connection via a modem or network PCMCIA card or other network connection. • It can be set to allow for scheduled or immedi- ate updates of web material, so that your desktop is maintained with current information. • It uses a web page design, which helps make the differences between files on your computer and links to Internet sites less apparent.
  • Page 51 WinBook XLi User’s Manual Fig. 2.7 The Windows 95 Taskbar. You can learn more about the use of the Active Desktop by checking in the Windows 95 Help file (Start/Help). 2.12 If you would prefer to change your desktop to the original Windows 95 desktop, there is a section below that explains how to do so.
  • Page 52 Your WinBook XLi has been set up with most common Windows 95 com- ponents active. There are, however, other components that can be added to...

  • Page 53: Windows 95 Desktop

    This will allow you to take advan- tage of the speed and power of your computer. Your WinBook XLi system is capable of running older DOS and Windows 3.x software if you already have such programs, but neither of these will take advantage of all of the features of your Winbook XLi system.
  • Page 54 Windows 95 desktop. Communications Your WinBook XLi might come with the optional built-in fax/modem or a PCMCIA fax/modem that allows you to take advantage of the fax and com- munications abilities of your system. The fax/modem is capable of running in two modes: as a fax and as a modem (which can be connected to other computers via their modems).
  • Page 55 WinBook XLi User’s Manual Figure 2.9 Online Folder 2.16 Windows program, you need only select the fax as your printer for that document. Then print the document just as you would to your printer. Your fax can also be used to receive faxes, which can be sent directly to your printer to produce a hardcopy of the fax transmission.
  • Page 56 Chapter 2: Basic Computing Due to limitations in telecommuniction connec- tions, maximum transfer rates might not be attain- able in your area. Note to advanced users: a list of AT commands is available in the Winbook XLi Help file. 2.17...
  • Page 57 Internet and the World Wide Web If your WinBook XLi came with a modem, or if you have a network con- nection, you can use your computer to connect to the Internet and World Wide Web.

  • Page 58: Dos Games

    Since games are among the most demanding programs for your system, you will want to have some knowledge of the settings and specifications for your XLi. This will help you set up the system effectively for your software demands. Games often require the CPU, hard drive, CD-ROM, joystick, mouse and sound hardware simultaneously.

  • Page 59: Chapter 3: Mobile Computing

    Chapter 3: Mobile Computing Chapter Three: Mobile Computing...

  • Page 60: Battery Operation

    Battery Operation Charging Your WinBook XLi comes equipped with a durable, lightweight, recharge- able lithium-ion battery that can power your system for over two hours when fully charged (longer if power management is used). actual duration of a charge will vary with how you use the computer and with how much you take advantage of the power management features of the system.
  • Page 61 Use the down arrow to scroll down to it and hit [Enter] to run the battery calibration. Follow the instructions provide by the battery calibration utility. As part of the calibration, the WinBook XLi will discharge the battery and shut down the system. This process can be lengthy. You should see a mes- sage indicating the status of the calibration.

  • Page 62: Cmos Battery Replacement

    CMOS Battery Replacement In addition to the battery that allows you to power your system for mobile use, your WinBook XLi includes a small, non-rechargeable lithium battery that maintains the clock and calendar functions of your system. This lithium coin cell has an average effective life of 1-2 years under normal operating conditions.
  • Page 63 Power Management In order to make the most of the mobile computing capabilities of your WinBook XLi, you will need to be aware of how to manage the power con- sumption of your system. Aggressive power conservation can provide extended computer usage. Sometimes aggressive conservation will not be needed, or you might prefer not to engage it.
  • Page 64 Figure 3.4: The Power Utility There are two power management systems available to you. 1. Your WinBook XLi has power management features built into the BIOS Setup program. You can change the degree of power management by entering the BIOS Setup program (see Chapter Seven) and adjusting the power management settings.
  • Page 65 Chapter 3: Mobile Computing Figure 3.5: Power Properties Figure 3.6: Advanced Power Properties Clicking on the Advanced button allows you to add the Suspend function to the start menu. It also allows you to set the system to (Figure 3.6) resume normal functioning when the modem detects an incoming call.
  • Page 66 WinBook XLi User’s Manual Figure 3.7: Troubleshooting Power Savings The Windows 95 power management tools also allow you to specify the time period of inactivity before the hard disk is spun down. (Figure 3.8) Spinning down the disk provides considerable power savings. If you want optimal battery life and are using the Windows 95 power management, you should consider a relatively short period of disk inactivity here.
  • Page 67 Figure 3.8: Hard Drive Power Management Taking advantage of power management features can have a significant effect on the battery use you can get on a single charge. A fully charged battery should provide you over two hours of system use, but aggressive power management can extend that time.
  • Page 68 There are some measures that you can take as a user to help optimize bat- tery use in your WinBook XLi. If you are running one or more PCMCIA cards, using the system audio and making frequent calls to the floppy diskette, CD-ROM or hard drive, you will find that battery power will be consumed much more quickly than with standard system use.
  • Page 69 Suspend mode for up to a week on a fully charged battery. Remember which mode you have chosen when you shut down the comput- er. Hitting a key or moving the mouse will activate a WinBook XLi in Standby mode. The Suspend mode is exited by hitting the power key.

  • Page 70: Infrared (Ir) Port - Printing

    Infrared (IR) Port The infrared (IR) port of your WinBook XLi provides a powerful tool for connecting to other computers, networks, and peripherals via a high-speed wireless connection. This port is sometimes referred to as a serial infrared port (SIR), but it is also capable of functioning as a second parallel port for printing.
  • Page 71 Chapter 3: Mobile Computing You can adjust the options for your IR port by selecting the Options tab. If your IR port does not function or conflicts with another (Figure 3.11) device you have added, you can change the setting for the COM port (see Chapter Seven).
  • Page 72 WinBook XLi and another IR-capable comput- er, there are a couple of steps that you will need to perform before your WinBook XLi is ready to be used in this way. If you have not already set up your system for a Direct Cable...
  • Page 73 Chapter 3: Mobile Computing Figure 3.15: Computer and Workgroup Names Figure 3.14: Windows Setup Direct Cable Connection In the Control Panel, select the Add/Remove Programs utility by dou- ble-clicking on it. (Figure 3.13) When the Add/Remove Program Properties window opens, click on the Windows Setup tab.
  • Page 74 If you do not want to allow sharing of your files or printer via your WinBook XLi (that is, if it will only be a guest), you can continue on to the section on “Making the Connection.” You will still be able to access files and printers that are set up for sharing.
  • Page 75 Chapter 3: Mobile Computing Figure 3.16: Networking Figure 3.17: Network Options WinBook XLi, you will need to set up your system for sharing. You can set this up by double-clicking on the Network icon in the Control Panel. (Figure 3.16) This will bring up the Networking window.
  • Page 76 3.18 You have now established the file and print sharing for your WinBook XLi. You can click OK to exit the Network utility. (You might be asked to reboot.) If you want to allow access to certain files on your system, you will now need to designate those files for sharing.
  • Page 77 Chapter 3: Mobile Computing Computer and the drive window containing the folders you want to share. Find the folders that you want to share. Right click on the (Figure 3.19) folder and click on the Sharing option of the pop-up menu. Figure 3.20: Access to Shared Folders You will now be asked to establish the kind of access you want to allow to this folder.
  • Page 78 3.20 Making the Connection To establish the IR connection between your WinBook XLi and another system, you will use the IR as if it were a direct cable connection between the systems. Note: the other machine will also need to have the software to support this connection.
  • Page 79 Chapter 3: Mobile Computing When you have selected the status of the machine, you will be asked to designate a port for the connection. For a connection between machines, you should select “Serial cable on COM4.” When you select a machine as the host, you will be asked to establish wherever or not a password should be required of the guest machine before completing the connection.
  • Page 80 Change button. You will then be asked to establish the port for the connection. If you want to maintain the same status as the last session, just click the Listen button (if your WinBook XLi is the host) or the Connect button (if your WinBook XLi is the guest).
  • Page 81 You can copy the files in those folders as you would any files in any drive window on your WinBook XLi. Figure 3.24: Subsequent IR Connections IR Printing...

  • Page 82: Using A Tv Receiver

    3/2 cable providing both video and audio connections. The TV- out jack and the audio-out jack on your WinBook XLi are not adjacent, so, if you want video and audio, you will want to purchase a cable that will be able to reach both jacks.
  • Page 83 prompt “Hit <F2> if you want to run SETUP”; it will go by quickly. Press the [F2] key to start the BIOS Setup program. In the Advanced menu of the utility, highlight the item Display to TV. Press the [F5]/[F6] keys to change the value of the item to either PAL or NTSC, according to the format of the TV receiver that you are using (NTSC in the U.S.).

  • Page 84: Zoomed Video

    7. The Display Properties window also includes a Television tab. If you click on this tab, you will see settings for adjusting the TV-out display. Press [Fn] +[F2] to toggle the output to your WinBook XLi’s display screen and the TV receiver (you might need to press it more than once –...

  • Page 85: Safety & Operations

    Although it is tempting to pack your WinBook XLi in your luggage, it is apt to result in a broken system. The best solution is to carry the WinBook XLi with you.
  • Page 86 The WinBook XLi can be used safely in a moving car. Power adapters that will connect between the WinBook XLi and a cigarette lighter socket are available.

  • Page 87: Travel

    Travel Travel Tips • It is a good idea to load common printer drivers onto your WinBook XLi (such as HP Laser Jet and DeskJet drivers). This will allow you to print from many printers at your destination, even if you do not carry your own printer with you.
  • Page 88 • Hand your WinBook XLi to an airport attendant rather than setting it on the conveyor for security checks. This will help reduce the possibility of theft.
  • Page 89 Chapter 3: Mobile Computing Remember to pack: • Your WinBook XLi • WinBook XLi driver disks and Windows 95 CD • Your AC adapter/power cord • Any international converters for your adapter • A spare length of phone cord • Printer and/or printer cable •...

  • Page 90: Chapter 4: Desktop Operation

    Chapter 4: Desktop Operation Chapter Four: Desktop Operation...
  • Page 91 Even if you have an existing desktop system, you will find it useful on occasion to be able to connect your Winbook XLi as if it were a desktop system. This chapter discusses those functions of your Winbook XLi that are typical of desktop systems.
  • Page 92 Figure 4.2: The Audio Mixer. also choose to mute the specific audio feature by clicking on the checkbox for that feature. In the Properties menu, you will also find the controls for adjusting record- ing. (Figure 4.3) If you will be using voice input via your microphone, you should adjust these settings to optimize voice input.
  • Page 93 Winbook XLi User’s Manual Figure 4.3: Recording Control. Playing an Audio CD You can play audio CDs through the sound system. The CD Player in Windows 95 will recognize the audio CD and launch the program to control the playback of the CD. It will appear on the taskbar. You can...
  • Page 94 Figure 4.4: CD Player The CD Player has an active display panel. You can click on the panel to toggle between: track and time, track and time remaining on the track, and the time remaining on the disk. (Figure 4.4) You can use this program to set up play lists for your CDs (Disc/Edit Play List).
  • Page 95 Playing Sound Files In addition to playing music from audio CDs, your Winbook XLi can play audio files stored in MIDI or WAVE file formats, as well as sound stored in audio form and used in programs and games. With the proper software, you can also use the sound system to play audio files via the World Wide Web, including live audio broadcasts.

  • Page 96: External Speakers & Microphone

    (which can be connected to your Winbook XLi through the “microphone” jack on the left side of the system). Wave files that you have recorded can be added to documents that support OLE.
  • Page 97 Installing Your Printer for Windows 95 When you first boot your Winbook XLi you will be offered the opportunity to set up your printer. If you did not set up your printer at that time, or if you have added a printer to your system, you can follow the steps below to prepare your printer for use in Windows 95.
  • Page 98 In the "Add Printer Wizard" click on Next. (Figure 4.6) Scroll through the list of manufacturers and printers to find yours. (Figure 4.7 ) Figure 4.7: Find your printer. Chapter 4: Desktop Operation If your printer came with an installation disk, it might have drivers there (this will often be the case if the printer came into production after the...
  • Page 99 Winbook XLi User’s Manual If you will be using an infrared port on your printer, check to deter- mine if the printer is set up as an infrared serial connection or an infrared parallel connection. 4.10 If your model is not listed here, check your printer documentation for a compatible printer to use as a source of the printer driver.
  • Page 100 Chapter 4: Desktop Operation Figure 4.9: Identify printer. 4.11...
  • Page 101 You will then be asked if you want to print a test page. (Figure 4.10) This would be a good idea if this is a new printer, or the first printer that you have set up for your Winbook XLi. Figure 4.10: Print test page.
  • Page 102 EPP and ECP transfer modes. EPP and ECP are both enhanced 2-way par- allel port modes that allow for increased performance for 2-way transfers such as those used to link another computer to your Winbook XLi system for file transfer. You might need to check the documentation of your device to determine the modes supported.
  • Page 103 External Keyboard Your Winbook XLi comes with a PS/2 port (on the back) which can be used to connect an external keyboard to your system. You should shut down the system before connecting the keyboard. Connect the keyboard to the PS/2 port and start up the system.

  • Page 104: Usb Ports

    If you use a serial mouse, connect the mouse to the serial port located behind the right I/O door on the back side of the Winbook XLi, as you face the back side. The serial port is the right connector inside of the small bay.
  • Page 105 You can connect a USB device by plugging the USB cable into the USB port on the rear of your WinBook XLi. Since the USB devices can be chained together, you can plug USB devices into each other or into the USB port of your WinBook XLi.

  • Page 106: Optional Port Replicator

    These devices can draw power through the hub device, leaving your Winbook XLi free to conserve or recharge battery power. If you have a mobile USB device and want to make use of the Winbook XLi as the power source for the device, consider using an aggressive power manage- ment setting to help maximize battery life.
  • Page 107 Control Panel (Start/Settings/Control Panel/Add New Hardware) to set up the system to work with this additional hardware. To connect your Winbook XLi to a port replicator, open the rear door to expose the docking port of your system. Then secure the connection as directed in the documentation for the port replicator.

  • Page 108: Chapter 5: Pc Cards (Pcmcia)

    Chapter 5: PC Cards (PCMCIA) Chapter Five: PC Cards (PCMCIA)

  • Page 109: Pc Cards

    PC Cards come in three types: Type I, Type II and Type III. These types vary in width, with Type I being the thinnest and Type III being the thickest. Your Winbook XLi can support up to two cards at a time, in the following configurations:...
  • Page 110 XLi. If the driver for your actual card is not found in the Windows 95 data- base of drivers and you choose a generic driver, you should consider taking the card out of the slot when it is not in use to avoid draining the battery.
  • Page 111 WinBook XLi User’s Manual Although PC cards are often Plug and Play, you should always refer to the manufacturer's documentation for your card. Some manufactur- ers might have optimal ways for using their card. have used before) and beep twice. A card icon will appear on the taskbar.
  • Page 112 Chapter 5: PC Cards (PCMCIA) Figure 5.2: PCMCIA Slots. Figure 5.3: The PCMCIA Icon on the Taskbar. You can check on the status of the installed PC Card by clicking on the icon on the taskbar. You can check or alter the properties of the PC card usage of your system by double-clicking on that icon.
  • Page 113 WinBook XLi User’s Manual You can also check the PCMCIA properties by selecting the PCMCIA icon in the Control Panel. (Figure 5.6) Figure 5.5: PCMCIA Properties.

  • Page 114: Pcmcia Network Connections - Sharing

    Chapter 5: PC Cards (PCMCIA) Figure 5.6: Control Panel PCMCIA Network Connections Once your network card has been recognized and Windows 95 has installed the necessary networking files, you will be asked to restart your system to allow the new networking environment to function. Windows 95 will configure your files and then ask you to restart your system so that the new files can take effect.
  • Page 115 WinBook XLi User’s Manual Windows 95 will install standard networking protocols for cards it has recognized. Contact your net- work administrator to determine if you will need to configure your system for other protocols. If you will be using your network outside Windows 95 (e.g.
  • Page 116 (Figure 5.8) You will also see a button here that will allow you to set up your Winbook XLi for file and/or printer sharing. If you will want to allow your files or your printer to be shared by other com- puters on the network, you can set up the file and printer sharing as described in the section below.
  • Page 117 (Figure 5.10) Figure 5.10: File and Print Sharing You have now established the file and print sharing for your Winbook XLi. You can click OK to exit the Network utility. When you have finished making these changes, you will be asked to reboot your system to allow...
  • Page 118 If you want to allow access to certain files on your system, you will now need to designate those files for sharing. Open the Windows Explorer program (Start/Programs/Windows Explorer) or My Computer and the drive window containing the folders you want to share. Find the folders that you want to share.
  • Page 119 WinBook XLi User’s Manual You will now be asked to establish the kind of access you want to allow to this folder. (Figure 5.12) Figure 5.12: Access to Shared Folders You should consider who will be using the access and why and establish the necessary passwords.

  • Page 120: Pcmcia Scsi Interface

    SCSI interface card in one of the PCMCIA slots in your Winbook XLi. Once your card has been recognized and the proper drivers loaded, you will be able to connect SCSI devices to your Winbook XLi. (Figure 5.13) Figure 5.13 SCSI Properties.

  • Page 121: Pcmcia Modem

    PC MCIA Modem Your WinBook XLi might have come with an optional PCMCIA modem. Even if your unit came with a built-in modem, you might purchase a PCM- CIA modem (e.g. one that connects to a cellular phone).

  • Page 122: Chapter 6: Upgrading

    Chapter 6: Upgrading Chapter Six: Upgrading...

  • Page 123: Memory

    Memory Since RAM requirements for software programs are constantly increasing, your WinBook XLi is made to allow for an easy upgrade in system memo- ry with SO-DIMM modules provided by WinBook Corporation. Your WinBook XLi has two memory slots that allow you to install new memory configurations.
  • Page 124 32MB 64MB 64MB Your WinBook XLi typically comes with a single memory module installed in the forward memory compartment. You can upgrade the amount of RAM in your system by adding an additional module to the rear memory compartment and/or replacing the module in the forward compartment with a larger capacity module.
  • Page 125 WinBook XLi User’s Manual Figure 6.2: Removing the Memory Compartment Covers. 4. Slide the cover toward the front of the system and then remove it. 5. The cover of the rear memory compartment can be removed by sliding it forward and lifting it out of its slot.
  • Page 126 Figure 6.3: The Memory Compartments 6. If you will need to remove a module or modules to complete your upgrade, push outward on the edge clips to release the module, angle the card slightly upward and gently slide it from its edge connector slot. Store the card in the anti-static bag that contains your new card(s).
  • Page 127 12. Start your computer. The WinBook XLi should automatically register the new memory.
  • Page 128 Hardware and software changes quickly. In order to make it easy for you to expand the capacity of your WinBook XLi, the hard drive in your WinBook XLi is made to be easily swapped out for upgrading. (Figure 6.5) You should be sure to back up your hard drive before attempting to change the hard drive.
  • Page 129 To upgrade your hard drive: 1. Back up the installed drive completely. Be sure that you have the bootable floppy disk that came with your WinBook XLi if your new drive does not come with an operating system (e.g. Windows 95) already loaded.
  • Page 130 Angle it from the bay. Set the screws in a safe place. (Figure 6.7) 6. The drive is attached to a special bracket that secures it to the WinBook XLi. Remove this bracket from your existing drive.
  • Page 131 Windows 95. The diskette that came with your system has all the proper drivers for the WinBook XLi hardware and a utility for just this kind of upgrade.

  • Page 132: Firmware Upgrades

    “Read Me First” Card to get assistance in upgrading your firmware. Other Upgrades (Card Bus) The easiest way to upgrade the capabilities of your WinBook XLi is to take advantage of the PCMCIA slots in your system. These can be used...
  • Page 133 Chapter 7: Configuring & Maintaining Your System Chapter Seven: Configuring & Maintaining Your System...

  • Page 134: Setup Program

    WinBook XLi User’s Manual You do not need to exit to the Setup program to adjust the time and date of your computer. You can adjust these from within Windows 95 by double- clicking on the clock on your taskbar and adjusting the information in the Date/Time Properties window.
  • Page 135 Figure 7.1: The Main menu of the Setup program PhoenixBIOS Setup Utility Main Advanced Security System Time: [23:45:14] System Date: [2/18/1998] > Primary Master [4100MB] > Primary Slave [CD-ROM] Large Disk Access Mode: [DOS] > Boot Options System Memory: 640 KB Extended Memory: 31744 KB Help...
  • Page 136 If these numbers do not add up to the total RAM in your sys- tem, you might need to check the memory bay on the bottom of your WinBook XLi for a dislodged memory module. See the section on adding memory in Chapter 6.

  • Page 137: Primary Master And Slave Submenus

    Enter Type: The default setting for this item is [Auto], which allows the WinBook XLi to automatically type the drive in your unit. It is recom- mended that you preserve this setting and allow the unit to type the drive.
  • Page 138 Slave Menu will not display this item, since this information does not apply to CD-ROM drives.] Heads: If your WinBook XLi has autotyped your hard drive, you will see the number of heads displayed in this field. If you have selected a manual setting, you can enter the number of heads here.

  • Page 139: Boot Options Submenu

    Chapter 7: Configuring & Maintaining Your System LBA Mode Control: In manual modes, enables or disables the LBA mode control. If the drive is autotyped, you will see the selected mode displayed here. 32 Bit I/O: This enables or disables 32-bit data transfers. You should leave this set to the default (Enabled), unless you are an experienced user or have specific information from Technical Support.
  • Page 140 WinBook XLi User’s Manual Fig. 7.3 Boot Options Submenu PhoenixBIOS Setup Utility Main Advanced Security Boot Options 1. [Diskette Drive] 2. [Hard Drive] 3. [CD-ROM Drive] Help Select Item F5/F6 Exit Select Menu Enter The typical configuration is: 1. [Diskette Drive] 2.

  • Page 141: Advanced Menu

    Advanced Menu This menu allows you to make changes to other hardware information for your system, including Plug and Play functioning and the settings for the integrated peripherals. (See Figure 7.4) Point Device: Enables/Disables the internal pointing devices and/or PS/2 mouse.
  • Page 142 WinBook XLi User’s Manual The Reset configuration data option should only be changed to “yes” if you are instructed to do so by Technical Support. Changing this setting can cause system malfunction. 7.10 Audio Options: Press [Enter] when this field is highlighted to enter the submenu (see the section on the Audio Options submenu below).

  • Page 143: Audio Options Submenu

    Joystick: Either disables joystick function or automatically detects the presence of a joystick. You must have a game/MIDI port, such as the one that can be found on the optional port replicator, to use a joystick with your WinBook XLi. 7.11...

  • Page 144: Peripheral Configuration Submenu

    WinBook XLi User’s Manual 7.12 Fig. 7.5: Audio Options Submenu PhoenixBIOS Setup Utility Main Advanced Security Audio Options Menu Sound: [Enabled] SoundBlaster Port: [223 - 22F] FM Synthesis Port: [338 - 38B] MPU Controller: [330 - 331] DMA A: [DMA 1]...
  • Page 145 Infrared Port: Disables, automatically detects or manually sets the address for the IR port. If you “Enable” this port, you will be provided with menu options to permit manual settings. In either “Enabled” or “Auto” modes, you will be asked to choose from the available IR modes: FIR, IrDA, ASK- Parallel port address: Disables, automatically detects or manually sets the address for the LPT port.

  • Page 146: Security Menu

    There is no way to clear or change a forgotten password until you send the computer back to the service department. Your WinBook XLi allows you to set two levels of passwords: a supervisor password and a user password. These each provide a level of security that prevents access to your system by unauthorized users.
  • Page 147 security for your files. You can also take advantage of security built into Windows 95 or your software applications to provide other levels of security. The two levels of passwords provide different levels of access. User pass- words enable users to use the system upon providing the appropriate pass- word.
  • Page 148 WinBook XLi User’s Manual The system will recognize any combination of up to 8 alphanumeric characters. It will ignore any other symbols or keys. You should select a password that will be easy to remember, but which will not be immediately obvious to someone trying to circumvent your security settings.

  • Page 149: Power Menu

    The default setting is “Supervisor.” Power Menu Your WinBook XLi has an array of elaborate power management features that will enable you to extend battery life. As you use your system, you should try various power management settings to find the balance of sys- tem response and power management that works best for you.
  • Page 150 WinBook XLi User’s Manual 7.18 Fig. 7.8 The Power Menu PhoenixBIOS Setup Utility Main Advanced Security PM Mode Savings: [Maximum Battery life] Enabled PM Savings On: [DC Only] Standby Timeout: [1 Minute] Suspend Mode: [RAM] Auto Suspend Timeout: [5 Minutes]...
  • Page 151 Chapter 7: Configuring & Maintaining Your System Suspend Mode: This allows you to save active sessions to RAM (this requires some minimal level of power but allows for a faster return to nor- mal functioning) or DISK (this saves the session to disk and does not require power to maintain the session).

  • Page 152: Exit Menu

    Setup program in this session and exit the Setup program. Load Setup Default: Restores all the values to the default settings that were in place when you received your WinBook XLi. You can now save these changes and exit or return to the other menus to make additional changes.

  • Page 153: Viruses

    Battery Calibration: Runs the battery calibration utility. This is necessary to optimize battery efficiency over time and to properly calibrate a new battery. Viruses It is possible that your computer might become infect- ed by a virus, a program which was designed to move into a computer’s system and cause damage.

  • Page 154: Backup

    In order to insure that you have such a disk, you should write protect the boot disk that came with your WinBook XLi. You should consider carrying a write-pro- tected boot disk with your computer, to allow for a clean boot wherever you might be using your system.

  • Page 155: Archiving

    Most such drives can be con- nected to your WinBook XLi’s parallel port or through a PCMCIA card that provides a SCSI port or other interface port. Archiving In addition to backing up your work, it is also worth considering archiving old files.

  • Page 156: Cleaning

    Humidity: A relatively small amount of moisture can cause a short in electronic components. If you see condensation appearing on other equip- ment around you, you should not turn on your WinBook XLi. In general, relative humidities in excess of 85% should be avoided.
  • Page 157 Vents: After shutting down and unplugging your system, use a hand-held vacuum to clean the vents on the case of your WinBook XLi. If you work in a dusty environment, you should try to vacuum often to avoid accumula- tion of dust on internal components.

  • Page 158: Chapter 8: Troubleshooting

    Chapter 8: Troubleshooting Chapter Eight: Troubleshooting...

  • Page 159: Keyboard

    XLi is not working. ACTIONS: • If you plugged the keyboard into the Winbook XLi after it was turned on, restart the Winbook XLi with the keyboard plugged in. If restarting doesn’t help, your keyboard may be defective or incompatible with PS/2 specifications.

  • Page 160: Pointing Devices

    Because the WinBook XLi can only support two pointing devices at once, units with both a touchpad and pointing stick require that the touchpad be disabled when an external device is present. The “auto” setting should handle this transition.
  • Page 161 • Move the pointing device more slowly across the screen. Rapid pointer movement can cause the pointer to sometimes disappear when the Winbook XLi is using resources to save a file or print a document. Usually the pointer’s characteristics will return to normal after the Winbook XLi finishes tasks that consume its resources.

  • Page 162: Ports

    • Check the Peripheral Configuration submenu of the Advanced menu of the Setup program to be sure that the port is set to either “Auto” or “Enabled.” If the port is disabled, the WinBook XLi will not communi- cate with external devices connected to the port.
  • Page 163 Winbook XLi User’s Manual • Your cable may be broken or you may have the wrong kind of cable. If so, the Winbook XLi will not be able to communicate with external devices. Try replacing the cable. PROBLEM: I can’t get my Serial Infrared Port to work properly.
  • Page 164 Also see that the printer’s communication cable is connected properly to the Winbook XLi’s LPT1 Port and to the back of the printer. • If the printer is turned on, there should be a power indicator that illumi- nates.
  • Page 165 Winbook XLi User’s Manual • The printer driver in the operating system may not be set correctly. Check the printers window in My Computer to be certain that your printer has been set up. If not, follow the directions in Chapter Four for setting up the printer.

  • Page 166: Audio

    This is the jack closest to the front of the system. It has the headphone icon beside it. • Are you using the correct connector? The Winbook XLi’s external speaker connector is compatible with a 3.5mm stereo audio plug.
  • Page 167 • Check that Mute is not enabled. Press [Fn]+[F10] to toggle the Mute setting. • If you have external speakers or head phones plugged into the WinBook XLi, the built-in speakers are automatically disabled. Try unplugging external speakers or headphones to see if the audio is restored to the built-in speakers.
  • Page 168 • Inspect the cord for wear or damage. Usually you will find this at the ends of the cable where connectors are attached. If you find damage to the cord, repair or replace the cord, then try again. • Most external speakers have their own volume control. Make sure that this volume control is not turned all the way down.

  • Page 169: Cd-Rom

    PROBLEM: My CD-ROM Drive door won’t open. ACTIONS: • Turn the Winbook XLi on. While the power is ON, press the button on the CD-ROM Drive. The drive door should open. • If the door still will not open, you can manually eject the disk. There is a small hole on the door of the CD-ROM drive.
  • Page 170 See the Windows 95 documentation for informa- tion on how to adjust the size of the recycling bin. • The Winbook XLi comes equipped with removable hard drive. If it would be inconvenient to remove files to gain disk space, you can easily upgrade your drive to one with a higher capacity.
  • Page 171 • Have you formatted the disk? Some new disks are not formatted for use with your Winbook XLi. If your disk is not formatted, or if the disk is formatted for use with another type of computer, Windows 95 will notify you.

  • Page 172: Booting Up

    PROBLEM: Diskette will not eject from the drive. ACTIONS: • A label may have become detached and is blocking the ejection of the disk. Visually inspect slot to see if you can see any obstruction by the label. Call Technical Support if you observe an obstruction. •...
  • Page 173 8.16 • If you have forgotten your password, there is no easy way to recover the password. You will need to return the computer to WinBook for service. PROBLEM: The computer provides a message indicating that the operating system is missing.
  • Page 174 • Floppy disk is defective. Throw it away. PROBLEM: Computer does not come on when the power switch is turned on. ACTIONS: • Be sure that battery is properly seated in the battery bay. • If you are not sure of the battery charge level, try connecting the AC adapter.

  • Page 175: Miscellaneous

    Winbook XLi User’s Manual 8.18 Miscellaneous PROBLEM: Date reads January 1, 1980. ACTIONS: • The lithium ion battery that maintains the system clock might be dis- charged. This battery is a silver disk located under the main battery for the unit. You can obtain a replacement battery from a computer retailer.

  • Page 176: Modem

    PROBLEM: The Suspend option does not appear on the Windows 95 Start menu. ACTIONS: • Double-Click on the Power icon in the Control Panel (Start/Settings/ Control Panel/Power). When the Power Properties window is opened, click on the Advanced button. Click on the box beside “Show suspend command on start menu”...

  • Page 177: Pcmcia Cards

    Winbook XLi User’s Manual 8.20 PROBLEM: Fax/modem disconnects during transmission. ACTIONS: • Be sure that you have disabled Call Waiting on your phone. • Check for faulty connections. • Check the noise in the lines. Excessive line noise might cause the connection to be dropped.

  • Page 178: Tv-Out

    • The TV-out port only directs video output to the receiver. To transmit sound, a cable must also be connected to the audio-out jack on the left side of your Winbook XLi (the jack with the headphone icon) and to the audio in jacks of the TV receiver.
  • Page 179 WinBook XLi User’s Manual 8.22...

  • Page 180: Glossary

    Glossary Glossary...

  • Page 181: Ac Power Adapter

    WinBook XLi need. APM (Advanced Power Management) Set of specifications that define how Windows 95 and the system firm- ware cooperate to conserve power in a computer system. The WinBook XLi complies with the Microsoft APM 1.2 specifications. Application A software program designed to perform certain functions and uses.
  • Page 182 Glossary BIOS (Basic Input/Output System) This is the way in which your computer sends and receives very low-level instructions to and from your hardware equipment (such as your keyboard). You do not use the BIOS, but Windows 95 (and DOS) uses the BIOS as a way of communicating with your equipment.
  • Page 183 WinBook XLi User’s Manual Cache Memory that is used to improve performance by keeping recently used or soon-to-be-needed data in a separate memory position where it will not need to be searched for. This cache can be either an actual hardware cache with its own memory, or a section of your RAM separated off for this function.
  • Page 184 This can be done within programs and between programs. DC (Direct Current) The AC Adapter changes AC from a wall socket to lower voltage DC, and inputs the DC into the WinBook XLi to charge the rechargeable batteries which power the WinBook XLi. Defragmenting...

  • Page 185: Embedded Numeric Keypad

    ECP compatible expansion devices such as printers, backup tape drives, or LAN adapters. Embedded Numeric Keypad Feature of the WinBook XLi: 15 keys are within the rest of the keyboard. The numeric assignments are found on the upper right side of each key. Ethernet Local area network (LAN) hardware specification.

  • Page 186: Function Keys

    Glossary Flash BIOS ROM Memory chip in the WinBook XLi that stores the basic operating firmware, including the system setup software, advanced power management, and PCI bus support. The flash BIOS can be updated from a floppy disk or with a file downloaded from the WinBook web page.

  • Page 187: Hot Docking

    WinBook XLi User’s Manual Hot Docking The ability of the WinBook XLi to be connected to the port replicator while in normal operating mode. HTML (HyperText Mark-up Language) The language used by pages included in the World Wide Web. If you decide to create such a page, you would store a HTML document on the server of your Internet provider (you can check to see if your provider allows for such services).
  • Page 188 IRQs or Interrupts Signals used by the devices in a computer to inform the CPU that they need CPU cycles. Your WinBook XLi uses 17 interrupts which are num- bered from 0 through 15 (with one reserved for error handling). Conflicts can occur if two devices use the same IRQ, since each can interfere with the functioning of the other.
  • Page 189 WinBook XLi User’s Manual Macro A small program inside another program. Macros usually allow you to take a series of commonly repeated tasks within a program and create a small macro program that will carry out those steps for you.

  • Page 190: Plug And Play

    International Association) A device using PCMCIA standards (also referred to as the PC Card standard) that the user can install into the WinBook XLi. These credit- card sized electronic modules include, modems and network adapters. See Chapter Five for more information.
  • Page 191 WinBook XLi User’s Manual PS/2 Keyboard Keyboard standard for PCs that was set by IBM in 1987 with their introduction of the PS/2 system. The WinBook XLi will work with keyboards adhering to this standard. PS/2 Pointing Device Pointing device that uses a PS/2 interface connector to plug into the computer, e.g.

  • Page 192: Software Error Messages

    SIR (Serial Infrared) Infrared connection between two infrared-capable devices that operates as an additional serial port on the WinBook XLi. For the purposes of the oper- ation of the system, the SIR uses IRQ and COM settings as if it were a normal serial port.

  • Page 193: Suspend Mode

    Suspend to Disk WinBook XLi power management feature that allows you to quickly save your work to the hard drive while you are transporting or not using your system.
  • Page 194 Glossary Touchpad Pointing device that allows you to control the cursor with your finger. It is based on a pad that allows finger movements to be converted to pointer controls, and taps to be converted into switch inputs. URL (Universal Resource Locator) An address (or location) on the World Wide Web.
  • Page 195 WinBook XLi User’s Manual WINSOCK.DLL A file which allows Windows 95 to communicate with TCP/IP drivers. This file is necessary to allow you to connect to the Internet via Windows 95. World Wide Web (WWW) A subset of the Internet which relies upon browsers to allow a user to see images and watch video and hear sounds, rather than just view text.
  • Page 196 Glossary G.17...

  • Page 197: Index

    Index Index...
  • Page 198 WinBook XL User’s Manual AC Adapter, 1.5, 1.11, 1.12, 1.21, 3.2, 3.3, 3.9, 3.10, 3.31, 4.16, 6.3, 6.8, 8.17, 8.18 G.5 Audio Jacks, 1.7, 1.8 Index Audio Mixer, 1.23, 1.24, 1.25, 4.2-4.3 Auto Dim, 7.18 Battery, iv, 1.2, 1.3, 1.8, 1.11-1.12, 1.21-1.22, 3.2-3.5, 3.8-3.11, 3.27, 3.28, 3.31, 4.16, 5.2, 5.3, 5.14, 6.3, 6.8, 7.17-7.18, 7.20-7.24, 8.6, 8.17, 8.18,...
  • Page 199 Defragmentation, 2.4-2.5, G.5 Device Manager, 2.6-2.7, 5.3, 5.14 DMA, 7.5, 7.7, 7.11, 7.12, G.6 Docking Port, 1.3, 1.5, 4.7, 4.18 Drivers, 1.3, 1.26, 2.14, 3.29, 3.31, 4.7-4.9, 4.12, 4.13, 4.15, 5.2-5.4, 5.8, 5.13, 6.8, 6.10, 8.8, 8.16, G.16 ECP, 4.13, 7.13-7.14, 8.7, 8.9, G.6 Environment, 2.13, 2.17, 3.16, 3.29, 4.10, 5.7, 5.8, 6.7, 7.7, 7.16, 7.23- 7.25 EPP, 4.13, 7.13, 7.14, 8.7, 8.9...
  • Page 200 WinBook XL User’s Manual Index Infrared Port (SIR), 1.5, 1.26-1.27, 3.12-3.13, 3.23-3.24, 4.10, 4.15, 7.13, 8.6, G.8, G.9, G.13 Install, i, 1.14, 1.26-1.27, 2.6-2.10, 2.14, 3.3, 3.12, 3.16, 4.8, 4.9, 4.12, 4.16-4.17, 5.4, 5.5, 5.7, 5.8, 5.13, 5.14, 6.2, 6.3, 6.5, 6.8, 6.10, 6.11, 7.4, 7.5, 8.11, 8.16, 8.18, G.11...
  • Page 201 Numeric Keypad, 1.16, G.6 NumLock, 1.16, 7.9, 7.10 Online Services, 1.14 PAL, 3.25, 3.26, 7.10, 8.21, G.11 Parallel Devices, 4.13 Parallel Port, 1.5, 1.6, 1.7, 3.12, 3.23, 4.13, 7.13, 7.14, 7.23, 8.7, 8.8, G.6 Passwords, 3.15, 3.16, 3.21, 3.30, 5.7, 5.8, 5.12, 7.14-7.17, 8.15, 8.16 Backup, 2.5, 3.30, 4.13, 6.11, 7.19, 7.22, 7.23, 8.12, 8.13, 8.16, G.6 Boot, 1.12, 1.14, 4.8, 4.13, 6.8, 6.10, 7.2-7.4, 7.7-7.9, 7.10, 7.14-7.17, 7.21, 7.22, 8.15, 8.16, 8.18, G.3...
  • Page 202 WinBook XL User’s Manual Index RAM, 1.9, 1.17, 2.2, 2.3, 2.4, 2.13, 2.14, 3.9-3.11, 6.2-6.6, 7.4, 7.18, 7.19, G.4, G.6 Recycle Bin, 8.13 Safety, iii, iv, 3.27 Security, 3.30, 6.7, 7.2, 7.14, 7.15, 7.16 Serial Port, 1.6, 1.7, 1.18, 2.6-2.14, 4.14, 4.15, 7.12, 7.13, 8.5, G.13 Setup, 1.13, 1.14, 1.17, 1.21, 1.22, 2.6, 2.14, 3.3, 3.5, 3.6, 3.9, 3.10, 3.11,...
  • Page 203 Index Travel, 3.27, 3.29, 3.30, 5.3 TV-out, 1.3, 1.5-1.7, 3.24, 3.25, 3.26, 4.17, 7.10, 8.21 Upgrade, 1.9, 6.2, 6.3, 6.5, 6.8, 6.10, 6.11, 8.13 Index USB, 1.4-1.7, 1.26, 4.7, 4.8, 4.15, 4.16, 4.17, 4.18, G.15 VGA, 1.5-1.6, 1.19, 4.13, G.15 Viruses, 3.11, 7.16, 7.21, 7.22, 8.15 Volume, 1.17, 1.23-1.25, 4.2, 8.9, 9.10 WAVE Files, 4.7...

Table of Contents