Winbook XP5 User Manual page 45

Page 1 configures the basic system hardware. Most of the entries are defined by the hardware in
the computer. The entries must be the same as the hardware present. The chart on the next page
shows the items listed on the screen in the order they appear, with the default setting and the
options for each item.
[XP5 6-2]
System Time & System DateYou can set the correct date and time in the "System Time" and
"System Date" fields if the current system clock setting is incorrect.
Diskette A & B
Leave "Diskette A:" set to "3.5", 1.44" setting. Set "Diskette B:" to "Not Installed" unless you
have the optional docking station and it has a floppy disk drive in it, in which case set "Diskette
B:" to the correct type.
Hard Disk 1
Hard Disk 1 will be set to Auto Detect. Don't change the setting
Base Memory & Extended Memory
These are automatically detected by the system.
CPU Speed
The default setting for "CPU Speed" is "Fast." You can set it to "Slow" to simulate the
performance of the original IBM PC AT computer. Some older applications are speed sensitive
and may not run correctly at the Pentium CPU's faster operating speed. The slow setting should
allow these applications to run.