Winbook XP5 User Manual page 58

Action:
A)Use the Setup program to select the (default) Auto or the Simulscan display mode;
B)Press'Fn'+'FlO'to switch active display;
C)Make sure you plugged in the CRT monitor before
you powered up the WinBook.
D)Press 'Fn' + 'F6' to force display to Simulscan mode.
13. External display is not working in the high resolution mode.
Action:
High resolution drivers are not in use:
A)In Windows, switch to a higher resolution;
B)In a DOS session, install a high resolution driver for
the DOS application you want to use.
[XP5 A-8]
Keyboard Or Pointing Device Problems
1. Problem: Internal keyboard keys are not working or are only working intermittently.
Action:If an external keyboard is plugged in, remove it.
If problem persists, call the Technical Support number listed on the WinBook "Read-Me-
First" sheet.
Duplex adapter is defective, contact the service center. o If other PS/ 2 device is plugged
in, disconnect it.
Keyboard is incompatible with PS/ 2 specifications.
WinBook is defective, call the Technical Support number listed on the WinBook "Read-
Me-First" sheet.
2. Problem:External keyboard is not working.
Action:Keyboard is defective.
3. Problem:External PS/2 pointing device is not working.
Action:Setup program has disabled PS/ 2 pointing device:
A)Enter the Setup program at boot-up;