Winbook XP5 User Manual page 59

[XP5 A-9]
4. Problem:
Internal pointing device is too sensitive, or not sensitive enough.
From Windows Control panel open the Mouse controls: A) Readjust tracking and sensitivity as
appropriate.
Cursor disappears when moved rapidly.
·Move pointing device more slowly.
·Open Windows Control panel and select mouse icon:
A)Readjust tracking and sensitivity as appropriate;
B)Enable large cursor or mouse trails options.
Internal trackball operation is intermittent.
Trackball may be dirty. Clean trackball according to instructions at end of this chapter.
If problem persists, Call the Technical Support number listed on the WinBook "Read-Me-First"
sheet.
Communication Port Problems
1. Problem:External serial port is not working.
Action: Port is not enabled:
A)Enter the Setup program at boot-up;
B)Select Advanced Setup screen (Page 3);
C)Enable External COM port for 3F8 (COM1 default).Incorrect cable, purchase correct cable.
B)Select Advanced Setup screen (screen 3);
Enable PS/ 2 pointing device.
Check if any external PS/2 devices are plugged into the duplex
adapter.
Check if the external PS/ 2 device is defective, by unplugging it
and retrying. a If the system is plugged into the docking station,
unplug and retry.