Winbook XP5 User Manual page 62

Open'System'in the Control Panel, click on'Device Manager' and double-click
on'PCMCIA socket'. The driver listed should be'PCIC or compatible PCMCIA
controller'. Any other entry should be removed. o Card not recognized by Windows
PCMCIA driver: Card may not be completely compatible with PC Card standard and
may require additional driver or "enabler". Consult card documentation or manufacturer
to see if this is necessary.
- Either the card or the WinBook slot is defective. Call the Technical Support number
listed on the WinBook "ReadMe-First" sheet.
[XP5 A-13]
3. Problem:No beeps when PC card installed while running in MS-DOS-only
mode.Action:PCMCIA driver not included in CONFIG.SYS file or CONFIG.SYS file is
missing:Copy exisfing CONFIG.SYS to CONFIG.BAK then copy CONFIG.XP5 from WinBook
support floppy disk to CONFIG.SYS on hard disk. If you don't know how to do this call the
Technical Support number listed on the WinBook "Read-Me-First" sheet.Card not recognized by
DOS PCMCIA drivers:Card may not be completely compatible with PC Card standard and may
require additional driver or "enabler". Consult card documentation or manufacturer to see if this
is necessary.Card not recognized by DOS PCMCIA drivers or not found in PC Card database
files:Consult WinBook PCMCIA guide on how to create or modify a new card library
file.WinBook audio volume turned all the way down:
Turn up volume sufficient to hear beep tones.
PCMCIA events audio notification disabled in driver: Consult WinBook PCMCIA guide on how
enable PC Card sounds in DOS.
Either the card or the WinBook slot is defective. Call the Technical Support number listed on the
WinBook "Read-Me-First" sheet.
[XP5 A-14]
Check for WinBook PC Card icon in LCD indicator:
If the icon for the card slot with the card in it does not display in the
LCD indicator panel, either the card or the WinBook slot is defective.
Call the Technical Support number listed on the WinBook "Read-Me-
First" sheet.
2. Problem:Single beep when PC Card installed under Windows.
Action:Incorrect PCMCIA driver selected:
4. Problem:Single beep when PC card installed while running in
MS-DOS-only mode.
Action:Card not recognized by DOS PCMCIA drivers: Card may not