Winbook XP5 User Manual page 56

A) Check to be sure memory expansion card is correctly installed;
[XP5 A-5]
Display problems If you are using a docking station, unplug WinBook from dock and try again.
If failure persists, call the Technical Support number listed on the WinBook "Read-Me-First"
sheet.
6. Problem:Display is on, but system will not display any messages (blank screen)
Action:If an option has just been installed, remove newly installed option:
A)Check to be sure memory expansion card is correctly installed;
B)Check to be sure audio card is correctly installed;
C)Check to be sure modem is correctly installed.
If you are using a docking station, unplug WinBook from dock and try again.If failure persists,
call the Technical Support number listed on the WinBook "Read-Me-First" sheet.
7. Problem:The screen is not readable.
Action:If an option has just been installed, remove newly installed option:A)Check to be sure
memory expansion card is correctly installed; B)Check to be sure audio card is correctly
installed; C)Check to be sure modem is correctly installed.If failure persists, call the Technical
Support number listed on the WinBook "Read-Me-First" sheet.
[XP5 A-6]
Press the'Fn'+'FlO'keys simultaneously to change the active display
type setting;
B)Enter setup screen to select display type.
C)Press 'Fn' + 'F6' to force display to Simulscan mode.
If failure persists, call the Technical Support number listed on the
WinBook "Read-Me-First" sheet.
5. Problem:There is a blank screen and a series of beeps, or a
long continuous beep.
Action:If an option has just been installed, remove the newly
installed option:
B)Check to be sure audio card is correctly installed;
C)Check to be sure modem is correctly installed.