Winbook XP5 User Manual page 61

1. Problem:No beeps when you install PC card under Windows.
Action:PCMCIA driver not enabled in Windows:
A) Open 'System' in the Control Panel, click on 'Device
Manager' and double-click on'PCMCIA socket'. The
driver listed should be'PCIC or compatible PCMCIA
controller'. Any other entry should be removed.
B) Open 'PC Card' in the Control Panel. Check that the
Socket Status for both cards. With no cards installed both
should be 'Empty'. If you haven't run this before, follow
the instructions to enable PCMCIA.
Incorrect PCMCIA driver selected:
Open 'System' in the Control Panel, click on'Device
Manager' and double-click on'PCMCIA socket'. The
driver listed should be'PCIC or compatible PCMCIA
controller'. Any other entry should be removed.
Card not recognized by Windows PCMCIA driver:
Card may not be completely compatible with PC Card
standard and may require additional driver or "enabler".
Consult card documentation or manufacturer to see if
this is necessary.
WinBook audio volume turned all the way down:
Turn up volume sufficient to hear beep tones.
[XP5 A-12]
PC Card Sound Effects are disabled:
Open 'PC Card' in the Control Panel. Click on'Global PCMCIA
problems Settings' and see if the 'Disable PC Card sound effects' line
at the bottom of the window has a check in the selection box. If so,
click on it to deselect it.