Winbook XP5 User Manual page 85

combination to bring up the
7.Use FDisk to partition the rest of the hard diskSetup program.
Reboot the computer as before. The system will reboot to the A:Don't enter Setup from
Windows
prompt.or a Windows DOS session.
Type "FDISK" and 'Enter'to run the standard FDISK disk partition-
ing program. Select "1" to create a new partition and then press
'Enter' in response to the series of questions that pop up on screen.
When FDISK is complete, it will automatically reboot the computer
from the floppy drive.
B - 19
8.Format drive C:
Type "FORMAT C: / s / u" and press'Enter'.
9.Copy the floppy files back to a hard disk DOS directory Type "MD C: WINDOWS \
COMMAND" and press'Enter'. Type"COPY C:\WINDOWS\COMMAND"andpress'Enter'.
Remove the floppy disk after there is no more drive activity and reboot your computer. You
should see the C: prompt.
10.Configure the system for Suspend-To-Disk
Run the system Setup program by pressing 'Ctrl' + 'Alt' + 'S'.
Change the "Boot Drive Order" line back to 'C: A:".
Press 'PgDn' to go to Screen 2.
Select the "Suspend to" line and press the "+" (plus & equal sign) key until "Suspend-to-Disk"
appears.
Press 'Esc' and 'F4' to save and exit. The system will reboot.